Tieline Commander G3 Rack Codec
Bookmark and Share

Tieline Commander G3 Rack Codec


2 RU Commander Studio IP Codec (TLR300B2)

BSW PART: COMMBASESTUDIOIP

Tieline Commander G3 Rack Codec
Tieline Commander G3 Rack CodecTieline Commander G3 Rack CodecTieline Commander G3 Rack Codec
 Tieline Commander G3 IP codecs are amongst the world's most successful and widely used codecs for remote broadcasts, studio-to-transmitter links and audio contribution. The new TLR300B Commander G3 is a 2RU studio codec with comprehensive front panel hardware controls.

All Commander G3 codecs are EBU N/ACIP Tech 3326 compatible over IP and the company is committed to developing new IP and 3GIP applications that take advantage of emerging network infrastructures around the globe.

Tieline Commander rackmount studio codecs offer a choice between analog or AES/EBU input/output modules (specify your choice when ordering). Add analog or AES/EBU I/O modules as your needs change (sold separately).

The Commander G3 studio codec comes in two sizes: 2RU with front-panel hardware control (this model here, the COMMBASESTUDIOIP) and 1RU with front panel status LEDs (COMMBASESTUDIOLITEIP). Both include wired IP Audio on board and accept all optional modules.

The 2RU COMMBASESTUDIOIP features comprehensive front-panel hardware control including 4 x LED/PPM meters which can be configured to show send/return or user selectable channel mix. It can also be remotely controlled via the Tieline PC GUI.

Main Features:
• Two expansion slots which accept your choice of IP, 3G/3.5G, POTS/PSTN, ISDN, X.21, GSM and B-GAN satellite plug-in modules.
• A fully featured Graphic User Interface (GUI) for local programming and control of codecs.Your choice of analog or digital AES/EBU input/output modules.
• All Tieline codecs offer a suite of algorithms to suit all your live broadcasting requirements including Tieline's famous Music, MusicPLUS and Voice G3* algorithms - as well as industry standards such as G.711, G.722 and MPEG Layer II.
• Tieline's loss-tolerant MusicPLUS algorithm provides up to 20 kHz stereo audio quality with 20ms coding delay at bit rates as low as 96kbps - making it ideal for today's IP and 3G networks.
• Tieline Music can deliver up to 15 kHz FM quality mono audio at bit-rates as low as 24kbps, with only 20 milliseconds encoding delay and 15kHz stereo at 64kbps.
• Tieline Voice G3* is optimized to deliver up to 7.5 kHz quality audio at bit-rates as low as 9.6 kbps.
• A configurable 14 x 8 cross-point Digital Matrix Audio Router (DMR).
• Comprehensive and configurable communications facility with dedicated buttons for local and full-duplex studio-to-remote communications.
• Pre-configured and adjustable mono, stereo, mono/IFB and dual mono connection profiles
• 3 input and 3 output digital mixing capability, including 2 balanced mic/line inputs, 1 unbalanced auxiliary in/out, and 2 balanced outputs.
• On-board relay and RS-232 control system for local and remote control of equipment at either end of your codec link
• Full control of a remote codec's audio input levels from the studio.
• Free Tieline Toolbox PC software configuration and control software, offering configuration, audio routing and input control of your local and remote codec.
• Automatic connection failover.
• Remote-controllable via free Toolbox software or free TLG3GUI software interface on a computer over LAN, USB or serial connections (supplied with codec).
• 5 connection profiles: Mono, Stereo, Mono/IFB, Dual Mono, Bonded Mono

Specifications:

Analogue Audio Specifications
Analog Audio Input card - (optional card) 2x Female XLR and 1 x 6.35mm (1/4 inch) jack Aux balanced
Analog Audio Outputs - (optional card) 2x Male XLR and 1 x 6.35mm (1/4 inch) jack Aux balanced
AES/EBU Audio card - optional 1 1 x stereo Female XLR input and 1 Stereo Male output with Word Clock on BNC
AES/EBU Audio Card - optional 2 1 x stereo Female XLR input and 1 Stereo Male output with STR Ref Clock
Headphones - on all card options 1 x 6.5mm (1/4") Jack at rear shared with Aux out
Audio Input Impedance High Impedance - > 5K ohm
Output Impedance 50 ohm Balanced
Clipping Level +18dBu (input and outputs)
Frequency Response 20 Hz to 15kHz over POTS/GSM and 20Hz to 20kHZ over ISDN
Total Harmonic Distortion <0.01% at +4dBu
Signal To Noise Ratio Better than 84dB at +4dBu
Sample Frequencies
A/D & D/A Converters 24 bit Sigma-Delta
IP Sample Frequencies 16kHz, 24kHz, 32kHz, 48kHz
3G Sample Frequencies 16kHz, 24kHz, 32kHz, 48kHz
POTS Sample Frequencies 16kHz, 32kHz
ISDN Sample Frequencies 16kHz, 24kHz, 32kHz, 48kHz
X.21/V.35 Sample Frequencies 16kHz, 24kHz, 32kHz, 48kHz
X.21/V.35 Data interfaces Up to 384KBits/S
GSM Sample Frequencies 16kHz, 32kHz
Compression Algorithms
POTS

Tieline Music, MusicPLUS, Voice G3* and Uncompressed audio

ISDN

G.711, G.722, MPEG Layer 2, Tieline Music, Tieline Music Plus

GSM

Tieline Music & Tieline Voice G3*

X.21

G.711, G.722, MPEG Layer 2, Tieline Music, Tieline Music Plus

IP

Tieline Music, Tieline Music Plus and Tieline Voice G3*

3G

Tieline Music, Tieline Music Plus and Tieline Voice G3*

Module Interfaces
3G - (Software module) 3G GSM/UMTS/HSDPA/HSUPA or EVDO Rev 0/Rev A internal cards available or broadband cell phone via Tieline USB master module.
USB 3 x USB master inputs
IP - (Software module) TCP/UDP, SIP, over LAN, WAN, open internet, WiFi, WiMax
ISDN Basic Rate S/T or U modules with up to 2 B channels supported per module with RJ45 interface
POTS/PSTN/Analogue Telephone POTS Modem module with RJ11 connector
GSM HSCSD 14,400 to 28,800bps and CSD 9600bps (requires sim card)
X.21 DB15 male connector
Satellite External BGAN or Inmarsat Satellite phone can be connected to the ISDN module or IP LAN port
Data and Control Interfaces
USB Slave USB-1.1 slave
USB - Master optional module USB 1.1 Master
LAN 10/100 base T RJ45 connector
Serial RS232 up to 115kbps with or without CTS/RTS flow control Female DB9 Connector
RS232 Data interface port can be used as a proprietary data channel
CAN Differential CAN, 6 pin female DIN connector
Front Panel Interface
2 RU Rackmount Keypad 20 Key
Display 4 x 20 line LCD
Display 4 x configurable Tx and Rx indicator LCDs
Level indicators 4 x 8 level LEDs. Configurable source with selector button.
Channel On/Off On/Off, Gain controlled and matrix router configurable
Cue/Intercom Matrix Router configurable
Microphone Input 1 x 6.35mm (1/4inch) jack Aux balanced
Headphone Monitoring 1 x 6.35mm (1/4inch) shared with Aux out with volume and mix adjustment
Send Return Mix Mix between audio send/return or a mix of both
4 x Programmable hotkeys Matrix router configurable
Send Return Mix Switch between audio send/return or a mix of both
GPIO Relay Controls
Inputs 2 x Inputs: Contact Closure to ground with internal 5v feed at 5mA 0.15" pitch male pheonix connectors. (12V power connector has two relay inputs for power sensing one independent and 1 duplicated with phoenix connector)
Outputs 2x Outputs: floating solid state switching 48V 100mA
Relay Expansion Expandable to 8 in and 8 out using optional CAN 8+8 product.
General
Operating Temperature 5°C to 45°C (40°F to 115°F)
Power 90-250V AC, Auto-sensing 3 pin IEC connector
2 RU Rackmount Codec
Dimensions 48.5cm x 27.3cm x 8.8cm
Weight 2.83kg or 6.5Ibs


 

The Commander base unit is the CHASSIS with a single ‘wired-IP’ module. Additional modules available. Choose from ISDN, POTS and Wireless IP modules for extra versatility.

List Price: $3,350.00
$2,929.00
Free Shipping!
Usually Available in 1-2 Days
You Saved:
$421.00 (13%)


View ALL Tieline Products

Customers also Viewed...
Recently Viewed