DBX 4800
Bookmark and Share

DBX 4800


Driverack

BSW PART: 4800

4800
Grab the reins of stampeding sound frequencies and drive them home with the DBX 4800.

This complete equalization and loudspeaker management system boasts a powerful 96 kHz DSP engine, standard analog and digital I/O, a QVGA display, and multiple control surfaces to provide all the processing, flexibility and control you need for both installation and live use.

The 4800 includes four inputs and eight outputs with both analog and AES/EBU XLR connectivity. In addition to standard system processing functions, its 96 kHz processing engine offers insert processing functions to customize the processing path for your application, with extremely low latency and extended frequency response. Signal Routing, extensive EQ, Bandpass Filters, classic dbx Dynamics, and Feedback Suppression give you remarkable control of your sound, and a full color display combined with intuitive front panel controls and an easy to use GUI will have you riding tall in the sonic saddle no matter where you roam.

Main Features:
• 48 and 96 kHz operation with Wordclock input
• Full Color QVGA Display
• 4 analog and AES/EBU inputs
• Full Bandpass Filter, Crossover and Routing Configurations with Bessel, Butterworth, and Linkwitz-Riley filters
• 31-Band Graphic and 9-band Parametric EQ on every input
• 6-band Parametric EQ on every output
• Loudspeaker Cluster and Driver Alignment Delays
• Selectable DSP inserts on all inputs and outputs including Classic dbx Compression, Limiting and Advanced Feedback Suppression among others
• Ethernet HiQnet networking and control

Specifications:

INPUTS:
• Number of Inputs: 4
• Connectors: Female XLR
• Type: Electronically balanced/RF filtered
• Impedance: >50k ohm
• Maximum Input Level: Software selectable for: +28, +26, +24, +22, +20, +18, +16, +14 dBu
• CMRR: >40 dB typical, >55 dB at 1 kHz

DIGITAL INPUTS:
• Inputs:(4) AES/EBU Channels
• Connectors: Female XLR
• Type: Transformer Isolated, RF filtered
• Impedance: >110 ohms

RTA INPUTS:
• Input: (1) Analog
• Connectors: Female XLR
• Gain Range : 10dB to 50dB in 10dB increments

ANALOG OUTPUTS:
• Inputs: 8
• Connectors: Male XLR
• Type: Electronically balanced, RF filtered
• Impedance: 30 ohms
• Max Output Levels: Software selectable for: +24, +22, +20, +12, +8, +4 dBu

DIGITAL OUTPUTS:
• Outputs: (8) AES/EBU Channels
• Connectors: Male XLR
• Type: Transformer Isolated, RF filtered
• Impedance: >110 ohms

A/D PERFORMANCE:
• Type: dbx Type IVô Converstion System
• Dynamic Range : >114 dB unweighted, 116dB A-weighted
• Type IVô dynamic range: 128dB with transient material, A-weighted, 22kHz BW 126 dB with transient material, unweighted, 22 kHz BW 120 dB typical with program material, A-weighted, 22 kHz BW
• Sample Rate: 96kHz
• A/D Wordlength: 24 bits

D/A PERFORMANCE:
• Dynamic Range: 112 dB unweighted, 115 dB A-weighted
• Sample Rate: 96kHz
• D/A Wordlength: 24 bits

SYSTEM PERFORMANCE:
• Dynamic Range: 112dB unweighted, 115dB A-weighted
• Internal Processing: 32 bit floating point
• THD + Noise: 0.004% typical at +4 dBu, 1 kHz, 0 dB input gain
• Frequency Response: 20 Hz- 40 kHz, +/-0.5 dB
• Interchannel Crosstalk: <-85 dB at 1 kHz, 0 dB input gain

PROCESSING:
• Pre EQ Type: One 31-band Graphic EQ on each input One EQ that is switchable between 31-band and 9-band Parametric on each input
• Range: +/- 12dB
• Input Insert Processing: Two selectable Insert Processing blocks per input
• Type: Noise Gate, Compressor, Auto Gain Control, De-Esser, Sub-Harmonic Synth, Advanced Feedback Suppression
• Input Delay Length: Up to 682 mSec available
• Routing/Mixing: 4-input mixer available at each output allowing any input to be sent or mixed to any output
• Output Insert Processing: Two selectable Insert Processing blocks per output
• Type: Noise Gate, AutoWarmthÆ, Compressor, Auto Gain Control, Peak Limiter, Sub-Harmonic Synth, Advanced Feedback Suppression
• X-Over Filter Configs: 1x1, 1x2, 1x3, 1x4, 1x5, 1x6, 1x7, 1x8, 2x2, 2x3, 2x4 2x5, 2x6, 2x7, 2x8, 3x3, 3x4, 3x6, 3x7, 4x4, 4x5, 4x8
• Type: Bessel 6, 12, 18, and 24 dB per Octave Butterworth 6, 12, 18, and 24 dB per Octave Linkwitz-Riley 12, 24, 36, and 48 dB per Octave
• Polarity: Positive and Negative
• Phase Control: 0 to -180 degrees in 5 degree increments
• Output Delay Length: 1365 mSec shared between the outputs

MISCELLANEOUS:
• Control: Ethernet, RS-232
• Power Requirements: 100V to 240V 50/60Hz, 45 Watts
• Dimensions: 3.5"x19"x12.15"
• Weight: 11 lbs.

List Price: $5,299.95
$3,999.95
Free Shipping!
Usually Available in 1-2 Weeks
You Saved:
$1,300.00 (25%)


View ALL DBX Products

Customers also Viewed...
Recently Viewed