This dual distribution amplifier offers two 1x3 channels with balanced inputs and +24dBm outputs. A master gain adjustment for each channel controls all three outputs together to adjust for varying inputs while individual trimmers for each output let you make adjustments over a 20dB range to accommodate -10dbu semi-pro up to+8dBm line levels. It sports XLR connectors for easy use and also provides internal jumper plugs to parallel inputs for 1x6 2x6 or 1x12 operation.

Main Features:
• Active balanced, individually adjustable outputs
• Internal jumper plugs for paralleling inputs
• XLR input and output connectors

Specifications:
• Output Level: +24dBm peak into 600 ohm balanced load
• THD: .001% typical, 20 Hz-20 kHz
• IMD: .05% maximum, SMPTE measurement
• Slew Rate: 13 Volts per microsecond
• Response: +/- .25dB, 20 Hz-20 kHz
• Noise: -100dBm EIN, 20 Hz-20 KHz
• Gain: 40dB maximum
• Crosstalk: 70dB minimum at 10 kHz, any path
• Outputs: Active balanced, servo controlled, ground sensing, 50ohm output impedance, DC coupled
• Hum Rejection: 70dB CMR at 60Hz
• Inputs: 20Kohm active balanced, split and RF bypassed. +26dBm maximum input level
• Connectors: XLR type, Pin 2-HI, 3-LO, 1-GND
• Power: 115/230 VAC +/- 10%, 47 - 63Hz, 20VA, use.5A, 250VAC fuse, UL listed
• Size (W x H x D): 19" (48.2cm) x 1.75 " (4.45cm) x 7.5" (19cm)
• Weight: 18lbs.(8.2kg)