This dual distribution amplifier offers transparent performance with serious RF protection. It boasts two inputs, each driving four individually adjustable, active balanced outputs. You can also parallel inputs for up to 1x16 operation, and drive everything from balanced 600-ohm lines to Hi-Z IHF phono jack inputs without matching pads or noise compromises.

Main Features:
• Eight balanced outputs divided among two independent 1 in to 4 out channels
• Parallel inputs on rear connectors for 1x8, 2x8 or 1x16 operation
• Barrier block input and output connectors and fanout strips for quick and easy pre-wiring
• Individual wide range audio taper output level controls smoothly adjust outputs from +8 to -10dBm with taper to full off
• Separate LEDs for each 1x4 channel indicate output clipping

Specifications
• Output Level: +24dBm into 600 ohm balanced loads
• THD: .001% typical, 20 Hz - 20 kHz
• IMD: .05% maximum, SMPTE measurement
• Slew Rate: 13 Volts per microsecond
• Response: +/-. 25dB, 30 Hz - 20 kHz
• Noise: -100dBm EIN 20 Hz - 20 kHz
• Gain: 20dB maximum, each output has 40dB smooth adjustment range going to full off
• Crosstalk: 70dB minimum at 1 kHz
• Output Impedance: 400 ohms balanced, 200 ohm single ended, split and RF bypassed, AC coupled
• Inputs: 30K ohm active balanced, split and RIF bypassed; +22dBm maximum input level
• Hum Rejection: 70dB CMR at 60 Hz
• Power: 115/230 VAC +10%, 47-63Hz, 12 VA
• Size: 19"W x 1-3/4"H x 7-1/2"D
• Weight: 10 lbs
• Terminals: Euro style modular connectors