Tascam DR-680MKII
Bookmark and Share

Tascam DR-680MKII


High-Res 8-track Portable Recorder

BSW PART: DR-680MKII

Tascam DR-680MKII
Tascam DR-680MKIITascam DR-680MKIITascam DR-680MKIITascam DR-680MKIITascam DR-680MKII
Main Features:
• SD/SDHC/SDXC cards used as recording/playback media
• 6 balanced mic/line inputs (1-4: XLR/TRS combo jacks, 5-6: TRS jacks)
• 6 unbalanced outputs (RCA pin jacks)
• COAXIAL digital input and output (S/PDIF, AES/EBU)
• Recording/playback formats: BWF, WAV, MP3
• With BWF format, recording starting times can be stored in files
• 8-track recording at 96kHz/24-bit (BWF, WAV)
• 6 mic/line inputs and stereo mix recording or 6 mic/line input and digital stereo recording
• Record MP3 files at 96, 128, 192 and 320 kbps
• Record 4-channel MP3 files
• From 4 mic/line inputs (XLR/TRS combo jacks) or 2 mic/line inputs and digital stereo inputs
• 2-track recording at 24-bit/192kHz (BWF, WAV)
• From 2 mic/line inputs or digital stereo inputs
• Digital inputs and outputs support double speed 96 kHz and quad speed 192 kHz
• Sampling frequencies
• 44.1, 48, 96, 192 kHz (BWF, WAV) 44.1, 48 kHz (MP3)
• Quantization bit depth: 16/24-bit (BWF, WAV)
• 6 channels of TASCAM HDDA mic preamps for high audio quality with 48V phantom power
• Limiter and low-cut filter available on each mic/line input
• Built-in stereo monitoring mixer for headphone mix and/or recording
• Dual-recording function allows two files to be recorded simultaneously at different levels
• GANG function allows the input gain of multiple channels to be operated simultaneously
• Pre-recording function allows the capture of audio two seconds before recording is started
• Automatic-recording function can start and stop recording automatically in response to the input signal level (−48, −24, −12 or −6 dB)
• Even when multiple tracks are used, all recordings made at the same time can be managed as a single take/file
• Track incrementation allows a recording to be split by creating a new file at the desired point without interrupting recording
• Up to 1000 takes and 5000 files can be recorded on a single card
• Mark function can be used to move to specific points (up to 99 marks per take)
• Wheel can be used to change the playback position
• Repeat playback function
• Panel lock function to prevent misoperation
• Cascade function allows transport control of multiple DR-680MKII units using a master unit
• File name format can be set to use a user-defined word or the date
• High-speed transfer of files to a computer using USB 2.0
• 128×64-dot matrix display with backlight
• Built-in mono speaker with 500mW output
• Headphone output and level control (50mW+50mW/ 32ohm)
• Powered by 8 AA batteries or the included AC adapter
• USB cable and shoulder strap included
• Folding stand convenient for tabletop use
• CS-DR680 carrying case (sold separately)
• AR-DR680 case by Portabrace also available

Specifications:
• Recording media SD card(64MB to 2GB), SDHC card(4GB to 32GB), SDXC card(64GB to 128GB)
• File system FAT16 / FAT32

Recording format:
• WAV 44.1k/48k/96k/192k Hz, 16/24bit *192kHz : 2ch recording/playback
• BWF 44.1k/48k/96k/192k Hz, 16/24bit *192kHz : 2ch recording/playback
• MP3 44.1kHz, 16bit, 96k to 320k bps

Analog audio inputs:
MIC/LINE(BALANCED)
• Connector Ch 1-4 XLR-3-31 (1:GND, 2:HOT, 3:COLD) 6.3mm(1/4")TRS standard jack Ch 5-6 6.3mm(1/4")TRS standard jack Set to MIC
• Input impedance 2.4kohm
• Phantom power +48V (+5%,-10%), +10mA/Ch
• Standard input level LOW -51.5dBu HIGH -75.5dBu
• Maximum input level LOW +3dBu HIGH -21dBu
• MIC input gain 63dB Set to LINE
• Input impedance 10kohm
• Standard input level +4dBu
• Maximum input level +24dBu
• LINE input gain 63dB

Analog audio output:
• LINE OUT(UNBALANCED)
• Connector RCA pin jacks
• Output impedance 200ohm
• Standard output level -10dBV
• Maximum output level +6dBV Phones:
• Connector 6.3mm(1/4")stereo phone jack
• Maximum output level 50mW + 50mW (32ohms loaded)

Speaker:
• Diameter 35mm
 • Impedance 8ohm
• Maximum output level 500mW

Digital Input/Output:
• Connector RCA pin jack
• Format IEC60958-3(S/PDIF), AES3-2003(AES/EBU)
• Single 44.1k/48k Hz
• Double 96kHz
• Quad 192kHz
• Level 0.5 Vp-p typical
• Output impedance 75ohm +/-20% unbalance SYNC Input/Output:
• Connector RCA pin jack USB:
• Connector Mini-B type
 • Format USB2.0 HIGH SPEED(480Mbps)
 • Power 8 AA batteries(LR6)
• AC100 to 240V, 50-60Hz
• Power consumption 8W (Phantom power on) Continuous operation time :
• Alkaline batteries (EVOLTA) About 6:00 (Rec:2ch, Phantom power OFF) About 4:30 (Rec:2ch, Phantom power ON) About 3:30 (Rec:6ch, Phantom power ON)
• NI-MH batteries (eneloop) About 5:30 (Rec:2ch, Phantom power OFF) About 4:30 (Rec:2ch, Phantom power ON) About 4:00 (Rec:6ch, Phantom power ON)
• Lithium batteries (Energizer ULTIMATE LITHIUM) About 11:00 (Rec:2ch, Phantom power OFF) About 9:30 (Rec:2ch, Phantom power ON) About 7:30 (Rec:6ch, Phantom power ON)
• Dimensions 216.4(W)×56(H)×188.4(D)mm 8.5(W)×2.2(H)×7.4(D)inch
• Weight 1.4kg(with batteries), 1.2kg(without batteries) 3.1lbs(with batteries), 2.6lbs(without batteries)
• Operating temperature 0 to 40˚C
• Standard accessories AC adaptor, USB cable, Shoulder strap, Owner's manual including warranty card

Audio performance:
• Frequency response 20Hz to 20kHz +0.5/-1.5dB (Fs 44.1kHz, LINE IN to LINE OUT, Input Level=FS-1dB) 20Hz to 20kHz +0.5/-0.5dB (Fs 48kHz, LINE IN to LINE OUT, Input Level=FS-1dB) 20Hz to 40kHz +0.5/-1.0dB (Fs 96kHz, LINE IN to LINE OUT, Input Level=FS-1dB) 20Hz to 80kHz +0.5/-5.0dB (Fs 192kHz, LINE IN to LINE OUT, Input Level=FS-1dB)
• Distortion 0.007% (1kHz, LINE IN to LINE OUT) S/N ratio 100dB (A-Weight, MIC IN to DIGITAL OUT) 100dB (A-Weight, LINE IN to LINE OUT) • EIN -124dBu or less

List Price: $799.99
$499.99
Free Shipping!
Usually Ships in 1-2 Weeks - Contact BSW for more Details
You Saved:
$300.00 (38%)


View ALL Tascam Products

Customers also Viewed...
Recently Viewed