Broadcast Tools RA-1
Rack Mount Shelf

The Broadcast Tools RA-1 (1-RU rack shelf) provides mounting for three tri-rack or two half-rack "Rack-Able" configured products. The RA-1 is pre-drilled for flush and recessed product mounting. The [...]

Broadcast Tools COA-9X DS/MAX
Connect-O-Adapter 9 ABC XDS; WWI IDC MAX StarGuide II/III Analog and AES Audio

Need to convert the DB-9 connector to the euroblock removable screw terminals? The Connect O' Adapter 9 XDS/MAX will do the job. The COA-9 XDS/MAX is designed to plug into the male 9-pin D-Sub [...]

Broadcast Tools HR-1
Headphone Remote

The HR-1 provides 1/8" and 1/4" headphone jacks with level control, momentary push button (cough,dump,etc) and mic-ON led. The HR-1 may be desktop mounted, under counter or turret mounted with the [...]

Broadcast Tools COA-37 XDS
Connect O Adapter, ABC XDS Starguide II/III

Here's another problem solver from Broadcast Tools for the ABC XDS or StarGuide II/III satellite receiver! The Connect O' Adapter 37 XDS provides an effective way to convert the male DB-37 connector [...]

Broadcast Tools Temperature Sensor
Optional Temperature Sensor for WVRC-4, WVRC-8 or VAD-2+, TempSentinel, Site Sentinel 4

Optional Temperature Sensor for WVRC-4, WVRC-8 or VAD-2+, TempSentinel, Site Sentinel 4

Broadcast Tools HR1-MP
Mounting Plate for HR1

Mounting plate accessory for the Broadcast Tools AHR1 headphone remote (shown in photo).

Broadcast Tools LR-5
Audio, AES and AC/DC Circuit Switcher

The LR-5 is a mechanical latching relay with one set of four pole double throw contacts and one set of single pole normally open contacts. The LR-5 may be used to switch all types of audio, AES and [...]

Broadcast Tools COA-15 MAX
Connect-O- Adapter15 WWI IDC MAX, StarGuide

Need to convert the DB-15 connector to the euroblock removable screw terminals? The Connect O' Adapter 15 MAX will do the job. The COA-15 MAX is designed to plug into the male 15-pin D-Sub connector [...]

Broadcast Tools HR1-MPXLR
Mounting Plate for HR1 with XLRS

Mounting panel accessory for the AHR1 (shown in photo) with XLR connector cut-out. Note: XLR connector not included.

Broadcast Tools RM-1
Rack Mount for Two 1/2 Rack Units 8" Deep

Rack mount kit for two Broadcast Tools 1/2-rack units, 8" deep.

Broadcast Tools ACPS2-RACK
Rack Mount for AC Power Sentinel 2

Rack mount for Broadcast Tools AC Power Sentinel and AC Power Sentinel Plus.

Broadcast Tools 12V Power Supply
Power Supply for AHR-1 PLUS 12VAC1000MA

Replacment Power Supply for AHR-1 PLUS

Broadcast Tools RM-3 Rack Shelf
Rack Shelf Two Unit- 19"

RM-3 allows mounting of one or two small profile type BTI products horizontally in one rack space. The blue rack shelf is flanged for strength and is equipped with eight 6-32 stand-offs. The front [...]

Broadcast Tools ACPS2-TEMP-PROBE
Temperature Sensor for AC Power Sentinel 2 Plus

Additional temperature probe for the Broadcast Tools AC Power Sentinel 2 Plus.

Broadcast Tools FLEXPANEL B-Stock
Filler Panel For RA-1 Rack Mount

The Flex-Panel is an innovative solution that lets you configure a filler panel to the required width when used with the RA-1 Rack Shelf.

Broadcast Tools FP-1
Filler Panel For RM-1

Filler panel for RM-1 rack shelf

Broadcast Tools Flex Panel
Filler Panel For RA-1 Rack Mount

The Flex-Panel is an innovative solution that lets you configure a filler panel to the required width when used with the RA-1 Rack Shelf.

Broadcast Tools Universal PS
Universal Power Supply, 5 Pin Din

Universal Power Supply, 5 Pin Din