Call us at (800) 426-8434
Site Control Accessories
This wide range of site control accessories is sure to make your job easier. Browse our selection and feel free to drop us an email or give us a call if you don't see what you're looking for.
1 - 25 of 33 Items
Burk Technology AP2010 ARC Plus**AutoPilot Software License ARC-PLUS
The Burk AutoPilot 2010 enables multi-site, PC-based facilities management for the entire line of Burk remote controls, including ARC Plus, ARC-16, GSC3000 and VRC2500. AutoPilot's fully customizable [...]
Burk Technology AP2010 ARC 16**AutoPilot Software License ARC-16
Burk Technology Plus-X IIUIntegrated, IP-based Input Unit
The Burk Plus-X Integrated Input Unit (IIU) connects 16 meter and 16 status channels to the ARC Plus. Metering channels can be configured for different voltage ranges. Connect up to 16 Integrated [...]
Burk Technology Plus-X ICRUIntegrated, IP-based Command Relay Unit
The Burk Plus-X Integrated Command Relay Unit (ICRU) facilitates the connection of 8 command channels to the ARC Plus (8 raise and 8 lower relays). Relays can be configured as momentary or latching. [...]
Burk Technology AP2010 GSC**AutoPilot Software License GSC
Burk Technology BTI Indoor SensorIndoor Sensor for BTU-4 and GT-4
The BTI Indoor Sensor for the Burk BTU4 is tailored for monitoring ambient indoor temperatures while maintaining an attractive appearance. Includes 15 ft. of shielded cable.
Burk Technology BTU-4 Temperature UnitTemperature Unit - 4 Probe Receiver
The BTU-4 Temperature Sensor supports four independent temperature sensors, and provides an AC line voltage sensor. One BT-O outdoor sensor included. All sensors include 15' of shielded cable. [...]
Burk Technology TLMTower Light Monitor
The TLM is a universal lamp alarm relay designed to sense the failure of flashing or steady incandescent beacon lamps or steady side lights. The toroidal current sensor provides islolation and allows [...]
Burk Technology LVSLine Voltage Sensor
The LVS monitors a single phase AC power circuit and provides a low-voltage DC output sample that tracks linearly with the AC input voltage.
•Linear, low-voltage DC output [...]
Burk Technology BT-O Outdoor SensorOutdoor Sensor for BTU-4 and GT-4
The BT-O Outdoor Sensor for the Burk BTU4 is supplied with the BTU-4 basic system, and is intended for general purpose monitoring of equipment or ambient temperatures. Includes 15 ft. shielded cable.
Burk Technology RSIEnhanced Speech Interface for the ARC Touch
The RSI Kit Recordable Speech Interface kit allows you the ability to record your own speech, allows dial-up telephone control of the ARC Plus Touch broadcast facility remote control system, as well [...]
Burk Technology ARC-Plus Firmware V3ARC Plus Firmware Upgrade Version 3
Version 3 introduces a brand new web interface, designed to leverage features of modern web browsers to offer high performance on diverse platforms. The new web interface does not require Java or [...]
Burk Technology BTS Stack SensorStack Sensor for BTU-4 and GT-4
The BTS Stack Sensor, designed for the Burk BTU4, is an adjustable probe which senses heat within the air ducting of your equipment. The supplied mounting hardware consists of a base and a [...]
Burk Technology Plus-X AC-8Remote Power Controller
Your remote site controller's best friend, or perhaps yours!
The Burk Plus-X AC-8 remote outlet controller makes it easy to manage power to 120V equipment at remote locations, allowing remote [...]
Burk PLUSX-GSCPlusx GSC Adaptor
The Burk Plus-X GSC Adapter lets you easily and affordably upgrade legacy GSC and VRC systems to the ARC Plus. The Plus-X GSC connects to up to two GSC/VRC wiring interfaces and command relays using [...]
Burk Technology AC Current SensorAC Current Sensor (910-093-001)
The Burk AC Current Sensor (model #910-093-001) allows measurement of current in AC power lines. Use the AC Current Sensor to monitor incoming AC power, or generator output. The unit provides an [...]
Burk Technology PlusConnect HZARC Plus-to-Harris Z and 3DX Transmitters Connection
The PlusConnect provides a seamless link between the ARC Plus and the Harris Z transmitter series, bringing more than 400 transmitter parameters aboard the ARC Plus and allowing broadcasters to [...]
Burk Technology Wiring InterfaceWiring Interface for GSC3000 or VRC2500 (910-085-110)
The Wiring Interface is designed to simplify the connection of metering and status inputs to the BSC I/O unit or VRC2500. It provides easy pin-for-pin wiring using push-on connectors, no soldering [...]
Burk Technology Module*Input / Output Module for Existing Radio Modem
Specify module type (digital or 39-185KHz).
Burk Technology External ModemExternal 56K Dial-Up Modem (MODEM-EXT-56K)
The MODEMEXT56K dial-up modem is used for a dial-up data connection between your computer and your Burk GSC3000 or VRC2500 system.
Burk Technology Command RelayCommand Relay for GSC/VRC (910-085-120)
The Command Relay unit provides isolation between a GSC I/O or VRC2500 unit and the controlled equipment. Each Command Relay unit has 8 command output channels with two relays each. Use two Command [...]
Burk Technology SL-1 ExtenderSerial LAN Extender
This serial LAN extender lets you deploy IP-enabled technologies where traditional Ethernet connectivity is impractical or unavailable. Unlike a serial-to-Ethernet converter, which allows RS-232 [...]
Burk Technology RMS*Radio Modem for ARC16 Studio Unit ( Universal Modem)
The Burk RMS universal modem for the ARC16 studio unit is used whenever the communications link is not a 2-wire circuit. This includes 4-wire telco, STL subcarriers, SCA channels, TRL, and digital [...]
Burk Technology SP-16* Rackmount Status Panel for ARC16 - Includes SSI
The SP-16 Status Panel connects to your ARC-16 studio unit
to provide a continuous display of all the status channels of
a remote unit. Now, even when another site is selected on the front panel
Burk Technology WMSWire Modem for ARC16 Studio Unit
The WMS Wire Modem is designed to be used with the Burk ARC16 studio unit on 2-wire circuits such as dedicated phone lines. Also available is the WMT, configured for a transmitter unit.