Audio Technica ATW-1701-L
Bookmark and Share

Audio Technica ATW-1701-L


Camera-mount Wireless Systems - ATW-R1700 camera-mount receiver and ATW-T1001 UniPak transmitter w/ MT830cW lavalier microphone

BSW PART: ATW-1701-L

Audio Technica ATW-1701/L
Audio Technica ATW-1701/LATW_1701_Lpic1.JPGATW_1701_Lpic2.JPGATW_1701_Lpic3.JPG

With its compact, portable design, the System 10 Camera-Mount high-fidelity digital wireless system is ideally positioned to capture media on the go. Perfect for video production, electronic news gathering (ENG) and every mobile application in between, the receiver features multiple mounting options to accommodate a variety of cameras and recording devices.

Like all of the products in the System 10 wireless family, the Camera Mount provides three levels of diversity assurance: frequency, time and space. Instantaneous channel selection, sync and setup make the Camera-Mount extremely easy to use, while its digital 24-bit/48 kHz wireless operation provides the ultimate in sound quality and dependable performance. Also, as the receiver operates in the 2.4 GHz range, it remains completely free from TV interference at all times.

Available in handheld, lavalier and body-pack configurations, each System 10 Camera-Mount wireless system includes a camera shoe mount in addition to the receiver and transmitter.

Main Features:
• Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance
• Operates in the 2.4 GHz range – completely free from TV interference
• Ultra compact receiver size with multiple mounting options
• Selectable balanced and unbalanced output jacks with level control for use with most cameras and recording devices
• Internal rechargeable 12-hr battery
• Separate headphone port and volume control for local audio monitoring
• Multi-pairing function to link a single receiver with up to eight body-pack or handheld transmitters
• Three levels of diversity assurance: frequency, time & space
• Automatic frequency selection for seamless, interference-free operation
• Extremely easy operation with instantaneous channel selection, sync and setup

Specifications:

OVERALL SYSTEM SPECIFICATIONS
• Operating Frequencies 2.4 GHz ISM band
• Dynamic Range >109 dB (A-weighted), typical
• Total Harmonic Distortion <0.05% typical
• Operating Range 30 m (100') radius, 60 m (200') diameter typical
• Open range environment with no interfering signals
• Operating Temperature Range 0° C to +40° C (32° F to 104° F)
• Battery performance may be reduced at very low temperatures
• Frequency Response 20 Hz to 20 kHz
• Depending on microphone type

RECEIVER SPECIFICATIONS
• Receiving System Diversity (frequency/time/space)
• Maximum Output Level 3.5 mm (1/8"), TRS balanced: +6 dBV Dual mono, unbalanced: 0 dBV
• Power Supply 100-240V AC (50/60 Hz) to 5V DC 0.5A switched mode external USB-type external power supply
• Battery Internal Battery: 3.7V rechargeable Li-ion battery
• Battery Life 12 hours Depending on environmental conditions
• Battery Charging Time: 4 hours 30 minutes Depending on environmental conditions
• Charging Temperature Range: 5° C to +35° C (41° F to 95° F)
• Dimensions 56.0 mm (2.20") W x 91.4 mm (3.60") H x 27.8 mm (1.09") D
• Net Weight 105 grams (3.7 oz)
• Accessories Included Two antennas; camera shoe mount; AC adapter (USB-type); USB cable; 3.5 mm (1/8") stereo cable

BODY-PACK TRANSMITTER SPECIFICATIONS
• RF Power Output 10 mW
• Spurious Emissions Following federal and national regulations
• Input Connections Four-pin Locking Connector
• Pin 1: GND, Pin 2: INST INPUT,
• Pin 3: MIC INPUT, Pin 4: DC BIAS +9V
• Batteries Two 1.5V AA not included
• Battery Life >7 hours (alkaline) Depending on battery type and use pattern
• Dimensions 70.2 mm (2.76") W x 107.0 mm (4.21") H x 24.9 mm (0.98") D
• Net Weight 100 grams (3.5 oz) without batteries

HANDHELD TRANSMITTER SPECIFICATIONS
• RF Power Output 10 mW
• Spurious Emissions Following federal and national regulations
• Batteries Two 1.5V AA not included
• Battery Life >7 hours (alkaline) Depending on battery type and use pattern
• Dimensions 254.8 mm (10.03") long, 50.0 mm (1.97") diameter
• Net Weight 280 grams (9.9 oz) without batteries Accessory Included AT8456a Quiet-Flex™ stand clamp

$449.95
Free Shipping!
Usually Ships in 1-2 Weeks - Contact BSW for more Details


View ALL Audio Technica Products

Customers also Viewed...
Recently Viewed