Bing ads convertion tracker RDL FP-PA18H
Bookmark and Share

RDL FP-PA18H


18 W High Ambient Temperature Audio Power Amplifier with Power Supply

BSW PART: FP-PA18H

FP_PA18H.jpg

The FP-PA18H is a high efficiency 18 W power amplifier with a line input, 8 ohm output and audio compressor capable of operation in a high ambient temperature environment. The thermal characteristics of the module case and construction throughout using high temperature components permit operation over a range of 0 to 70 degrees C. The FP-PA18H is ideally suited to outdoor applications, signage and other installations where ambient temperatures may become elevated due to limited convection.(Note: The power supply must be mounted in a location with a maximum ambient temperature of 40 degrees C. The FP-PA18H module is available separately for installation with a high temperature power supply or in systems with distributed 24 Vdc power. Contact RDL technical support for more details.)

The FP-PA18H features a balanced line level input that may be connected unbalanced. A gain control located next to the terminal block is designed to be adjusted manually or with a trimming screwdriver. The gain range will accommodate standard unbalanced levels as well as professional balanced levels. The output drives one 8 ohm speaker or multiple speakers connected to present an 8 ohm load to the amplifier.

The FP-PA18H includes an analog compressor/limiter for fidelity audibly superior to conventional class D amplifiers with digital limiting. The input GAIN setting determines whether the limiter alone is used for clipping suppression, or if the full compressor/limiter will be used to substantially increase the average output power beyond that of a standard 18 W amplifier. A red COMPRESSION LED flashes when the limiter is preventing output clipping. Normal audio level signals remain unaffected by the compressor thereby preserving audio dynamics. If the input level is increased so that the compressor is active, the LED remains dimly lit between peak flashes. The audio is compressed according to three dynamic time constants providing aural transparency while maintaining clean, unclipped amplified audio for input overloads of up to 20 dB. The FP-PA18H, with compression, is capable of producing average audio output levels and clarity normally expected from amplifiers with a much higher output power rating.

Main Features:
• 18 Watts RMS into 8 Ω
• Operation in Elevated Ambient Temperatures to 70°C
• Input / Output Detachable Terminal Block Connections
• Line Level Balanced or Unbalanced Input
• Compressor/Limiter Controls Clipping
• LED to Indicate Audio Compression Threshold
• Compressor Produces Maximized Average Output Power
• Audio Quality Superior to Standard Amplifiers
• Ultracompact All Metal Construction
• High Efficiency Class D Operation
• Thermal and ShortCircuit Protection

Specifications:
• Input: Line level (+4 dBu nominal balanced; 10 dBV nominal unbalanced)
• Input Impedance: 10 kΩ balanced bridging; 5 kΩ unbalanced
• Gain Adjustment: Single turn audio taper
Minimum Input Levels:
 • Balanced: 18 dBu (to cross compressor threshold)
 • Unbalanced: 20 dBV (to cross compressor threshold)
Maximum Input Levels:
 • Balanced: +23 dBu
 • Unbalanced: +21 dBV
• Frequency Response: 20 Hz to 20 kHz (+/ 1 dB)*
• THD+N: < 0.5% (20 Hz to 20 kHz)*
• Compressor: Threshold 3 dB below rated output, automatically adjusting attack and release times
• CMRR: > 45 dB (50 Hz to 3 kHz)
• Noise: < 72 dB (below 18 W RMS, +4 dBu input)
• Output Power: 18 W RMS into 8 Ω
• Output Circuit: Class D
• Output Signal Detector Threshold: 30 mW @ 20 Hz; 20 mW @ 30 Hz; 10 mW @ 50 Hz; 5 mW @ 65 Hz through 20 kHz
• Output Signal Detector Output: Open collector, 5 mA
• Ambient Operating Environment: 0° C to 70° C Maximum
Indicators (3):
 • Red LED: COMP LED indicates compressor activity
 • Green LED: OUTPUT ACTIVE (controlled by output signal detector)
 • Blue LED: POWER on
• 24 Vdc power supply current: 80 mA (idle), 975 mA (max.), Ground referenced
• Power Supply (included): 100 to 240 Vac, 50-60 Hz, 1A max.; 24 Vdc output to module
• Dimensions: Height: 1.15 in.(2.92 cm); Width: 3.25 in.(8.26 cm); Length: 3 in.(7.62 cm) *measured at compressor threshold level equaling 12 W RMS output power
• Package Type: Cardboard Box
• Package Dimensions: 4.375 x 7 x 2.25 in.
• Shipping Weight: 1.03 lbs.
• WEEE weight: 0.755 lbs.
• Tariff code: 8543.70.9910

List Price: $280.26
$199.76
Free Shipping!
Call For Availability
You Saved:
$80.50 (29%)


View ALL RDL Products