Crown Broadcast FM30E-BSTOCK
Bookmark and Share

Crown Broadcast FM30E-BSTOCK


30-Watt FM Exciter - Composite Input Only

BSW PART: FM30E-BSTOCK

Crown-FM30T.jpgIn Stock
The FM30E is an economical stand-alone 30W FM transmitter that delivers a high level of performance. It is a basic exciter with composite input only.

Featuring low loss circuit boards and copper heat spreaders in the RF chain, it functions with less heat and improved life span. A robust power supply with switching voltage and power regulators for AC or DC operation let you use it anywhere power can be generated.

Crown Broadcast FM30E Features:
• Basic exciter with composite input
• Frequency Agile from front panel
• SWR metering from remote control
• Ability to control output power from remote control
• 3-Year warranty
• 24-hour service support
• Meets or exceeds all FCC requirements



FM30E TECHNICAL SPECIFICATIONS

Frequency Range : 87 to 108MHz (Japanese frequency available 74-90MHz as an option) Front panel agile

RF Power : 3 to 30 watts with front panel adjustment

RF Output Impedance : 50 Ohms unbalanced

VSWR : 1.7:1 Maximum with automatic foldback at higher VSWR

Frequency Stability : Better than +/- 1KHz over operating temperature range

Modulation Type : Direct Frequency Modulation of Carrier

Modulation Indication : LED Indicators with Peak indicators

FM S/N Ratio (FM noise) : Better than 60 dB (70 to 80 dB typical)

Asynchronous AM S/N Ratio : Better than 50 dB referenced to 100% modulation @ 100 Hz, no de-emphasis.

Synchronous AM S/N Ratio : Better than 50 dB with 100% modulation @ 100 Hz, no de-emphasis (typical >60dB)

RF Harmonics/Spurious Products : Better than –65 dB (75 dB typical)

RF Bandwidth : +/- 120 KHz, better than –35 dB; +/- 240 KHz better than –45 dB

Temperature : 0 to 50 degrees C

Humidity : 0 to 80% @ 20 degrees C (non-condensing)

Maximum Altitude : 10,000 ft (3,000 m)

AC power : 100 to 120 or 220 to 240 volts AC +/- 10%, 50 to 60 Hz

Power factor : Greater than 97% (lagging)

DC Power : 36 to 48 VDC (48V required for full output)

Power Consumption : 100VA

Regulatory Notification for FCC part 73 and 74 : Meets FCC requirements

RF Output connector : Standard type N, 50 Ohm

Chassis dimensions : 5.25 x 16.5 x 17.5 inches (13.4 x 41.9 x 44.5 cm) exclusive of rack mounts but inclusive of connectors

Weight : 25 pounds (11.3 Kg) shipping weight = 33 Pounds (14.9 Kg)


Wide Band composite operation

Composite Inputs : 1

Composite Input level : 3.8 Vp-p for +/-75KHz deviation

Composite total harmonic distortion + noise : < 0.05% from 50Hz to 15 Hz (0.03 typical)

Sub-carrier inputs : 3

Sub-carrier input level : 3.8 Vp-p for +/-75KHz deviation

Sub-carrier amplitude response : +/-0.3 dB from 40Hz to 100KHz

List Price: $3,495.00
$2,398.55
Free Shipping!
In Stock
You Saved:
$1,096.45 (31%)


View ALL Crown Broadcast Products

Customers also Viewed...
Recently Viewed