Bing ads convertion tracker Tascam ML-16D
Bookmark and Share

Tascam ML-16D


Analog/Dante Converter

BSW PART: ML-16D

ML_16D.JPG
ML_16D.JPGML_16Dpic2.JPG
The TASCAM ML-16D is a professional Dante-focused converter made specifically to insert or extract analog audio into or out of a Dante (Digital Audio Network Through Ethernet) network using external breakout devices that utilize Sub-D format connectors. A poweful and flexible solution, the TASCAM ML-316D has 2 D-Sub intputs and 2 D-Sub outputs, whch can easiy be connected to any of the many devices that utilize D-Sub connectors such as microphone preamplifiers, large and small format console mixers, audio interfaces, amplifiers, and euro block connector devices. This simple, yet elegant, solution enables audio to be quickly and easily inserted into - or extracted from - the Dante audio stream.

Main Features:
• Dante focused interface for connection of external audio into or out of a Dante audio network
Ÿ• 16 channel analog line input and 16 analog line outputs (48kHz/96kHz) using 4 D-Sub connectors Ÿ
• Dual redundant Ethernet jacks which support both primary and secondary connections Ÿ
• Up to 24 bit/96kHz quality Ÿ
• LED display for signal level and overload per input/output channel Ÿ
• Reference level dip switches for selectable DBu level metering
Ÿ• Firmware updatable via Dante port Ÿ
• AES67 and Revenna compatible

Specifications
Formats:
• 44.1/48 kHz, 16/24 bit
• 88.2/96 kHz, 16/24 bit
Input/output ratings:
 PRIMARY/SECONDARY connectors:
  • Connector: RJ-45
  • Transmission protocol: Dante
  • Gigabit Ethernet standard: 1000BASE-T (IEEE 802.3ab)
  • Cables: category 5e or faster STP cables
 ANALOG OUTPUT connectors:
  • Connector: D-sub 25-pin
  • Locking screws: No. 4-40 UNC (inch type)
  • Nominal output levels: +4 dBu, +6 dBu (only when maximum output level is +15 dBu)
  • Maximum output levels: +24 dBu, +22 dBu, +20 dBu, +18 dBu, +15 dBu (set by REF. LEVEL switches)
  • Output impedance: 200 Ω or lower
  • Applicable load impedance: 2 kΩ or higher
 ANALOG INPUT connectors:
  • Connector: D-sub 25-pin
  • Locking screws: No. 4-40 UNC (inch type)
  • Nominal input levels: +4 dBu, +6 dBu (only when maximum input level is +15 dBu)
  • Maximum input levels: +24 dBu, +22 dBu, +20 dBu, +18 dBu, +15 dBu (set by REF. LEVEL switches)
  • Input impedance: 10 kΩ or higher
  • * 0 dBu=0.775 Vrms
Audio performance:
 ANALOG IN to DANTE OUT:
  • Frequency response: +0.1 dB/-0.5 dB: 20 Hz/20 kHz (-16 dBFS input, 44.1/48 kHz sampling frequency, JEITA), +0.1 dB/-0.5 dB: 20 Hz/40 kHz (-16 dBFS input, 88.2/96 kHz sampling frequency, JEITA)
  • Distortion (THD+N): 0.001% or less (-1 dBFS input, 1 kHz, 44.1/48/88.2/96 kHz sampling frequency, JEITA)
  • S/N ratio: 113 dB or higher (44.1/48/88.2/96 kHz sampling frequency, JEITA)
  • Crosstalk: 115 dB or higher (1 kHz, 44.1/48/88.2/96 kHz sampling frequency, JEITA)
 DANTE IN to ANALOG OUT:
  • Frequency response: +0.1 dB/-0.5 dB: 20 Hz/20 kHz (-16 dBFS input, 44.1/48 kHz sampling frequency, JEITA), +0.1 dB/-1.0 dB: 20 Hz/40 kHz (-16 dBFS input, 88.2/96 kHz sampling frequency, JEITA)
  • Distortion (THD+N): 0.001% or less (-1 dBFS input, 1 kHz, 44.1/48/88.2/96 kHz sampling frequency, JEITA)
  • S/N ratio: 110 dB or higher (44.1/48/88.2/96 kHz sampling frequency, JEITA)
  • Crosstalk: 115 dB or higher (1 kHz, 44.1/48/88.2/96 kHz sampling frequency, JEITA)
Other:
• Power: AC100-240 V, 50/60 Hz
• Power consumption: 22W
• Dimensions: 483 × 45 × 303.8 mm (width x height x depth)
• Weight: 3.5 kg
• Operating temperature range: 0–40º
• Included items: Main unit x1, Power cord x1, Rackmount screw kit x1, Owner’s Manual (this document) including warranty x1

List Price: $1,599.99
$1,299.99
Free Shipping!
Call For Availability
You Saved:
$300.00 (19%)


View ALL Tascam Products

Customers also Viewed...
Recently Viewed