Bing ads convertion tracker Angry Audio Distribution Gadget
Bookmark and Share

Angry Audio Distribution Gadget


2x4 stereo or 1x8 monaural distribution amplifier

BSW PART: DISTRO-GADGET

Angry Audio Distribution Gadget
Angry Audio Distribution GadgetAngry Audio Distribution GadgetAngry Audio Distribution Gadget
Need to feed a stack of stuff from a single source? You could try the daisy-chain, but you may end up with a ground loop, signal degradation or worse. What you really need to get a signal to multiple destinations is a broadcast-grade distribution amplifier. We poured some fresh ideas into the DA and called it, of course, the Distribution Gadget.

The Distribution Gadget allows a single source to drive multiple destinations. This is especially useful in broadcasting for connecting the studio output to an air chain, internet encoder, recording device, etc. The Distribution Gadget eliminates the ground loops and signal loss that often occur when directly attaching multiple loads to a source.

With four inputs (one pair for consumer -10dBV unbalanced sources and the other for +4dBu professional sources), the Distribution Gadget is ready for anything. Naturally, the unbalanced inputs feature the same exclusive ground (loop) breaking circuitry found on our Balancing Gadgets. You can even switch between consumer and pro sources on the fly with the front panel switch.

There are eight separate balanced line output amplifiers. Every output is fully isolated from the others, so if one destination has a problem — for example, a half-plugged connector shorting an output to ground — the other destinations are blissfully unaware and receive a perfectly clean copy of the source audio.

With its direct-coupled, low-distortion, low-noise circuitry, the Distribution Gadget is sonically transparent. Tons of headroom too. Every output is capable of +24dBm. And our internal bi-polar linear power supply (no wall warts here) produces all the juice needed to deliver that pristine, perfect audio 24/7 for years. Recording-grade sonics, broadcast-grade durability.

Main Features:
• Stereo/mono mode switching 
• Direct coupled precision analog circuits for pristine perfect audio.
• Unbalanced IHF inputs feature our exclusive “ground loop breaking” circuitry.
• Powder-coated steel enclosure built for broadcast.
• Low noise linear power supply inside. No wallwart.
• Eight balanced outputs using the AES59 Standard.
• Dual inputs instantly switchable.
• High CMRR balanced pro inputs.
• Premium components throughout.

Specifications:

• Nominal Operating Level +4dBu (balanced) input to +4dBu output
• Nominal Operating Level -10dBV (unbalanced) input to +4dBu output
• Frequency Response ±0.2dB, 20 Hz - 20kHz
• THD+N ≤0.004%, 20 Hz - 20kHz
• Noise ≤90dBu, 20Hz - 20kHz
• Headroom ≥20dBu
• Maximum Output Level +26dBu (+24dBm @ 600Ω load)
• Input Impedance 20kΩ (pro inputs)
• Output Impedance 100Ω balanced
• Crosstalk ≤-75dB (10kHz)
• CMRR ≥70dB (20Hz to 20 kHz)
• North American Version 115VAC 60 Hz, NEMA 5-15P power plug
• European Version 230VAC 50HZ, CEE 7/7 power plug
• Power Consumption 4VA
• Operating Temperature 0° to 40° C (32° to 104° F)
• Storage Temperature -20° to 45° C (-4° to 113° F)
• Relative Humidity 0% to 90% non-condensing
• Cooling Venting Chassis (fanless)
• Width x depth x height 8.5 x 6.25 x 1.70 in., 21.6 x 16 x 4.32 cm.
• Weight 3.5 pounds, 1.6 kilograms

$249.90
Free Shipping!
Call For Availability


View ALL Angry Audio Products

Customers also Viewed...
Recently Viewed