Bing ads convertion tracker Lectrosonics M2 DUET System Package
Bookmark and Share

Lectrosonics M2 DUET System Package

Lectrosonics M2 Digital IEM Package with Dante - Transmitter, receiver, and FREE Gator Hardcase


Lectrosonics M2 DUET System Package
Lectrosonics M2 DUET System PackageLectrosonics M2 DUET System PackageLectrosonics M2 DUET System PackageLectrosonics M2 DUET System PackageLectrosonics M2 DUET System PackageLectrosonics M2 DUET System Package
Bundle with BSW and save! Purchase the Lectrosonics M2 Duet system (M2T, M2R) and receive a Gator case for the same price! Another, BSW Exclusive!
Package includes:
• Lectrosonics M2T Digital IEM Transmitter - With Dante
• Lectrosonics M2R Digital IEM Receiver
• Gator GU-1309-06-WPDF - Waterproof case w/ diced foam; 13.8"x9.3"x6.2

The M2T half-rack transmitter houses two independent stereo transmitters allowing for up to four stereo or dual-mono transmissions in a single rack space. The audio inputs can be individually configured to be analog or Dante compatible. The analog input connectors arefull size XLR/TRS combo types for balanced line level analog signals while the input preamp circuits use aspecial balanced amplifier with very high common mode rejection to minimize hum and noise. A Dante Ultimo™ interface via dual RJ45 connectors accepts Dante networked audio inputs and can cascade the digital stream to additional units via CAT6 cables. An additional RJ45 jack provides an Ethernet connection for programming and control via Wireless Designer software and a USB jack on the front panel allows for firmware updates. The transmitter features a full color, backlit LCD for high visibility in any environment, while the chassis is all-metal and can be racked singly or in pairs using included rack mount hardware.

Main Features:
• IEM (Wireless Monitor) with digital RF transmission
• 24-bit digital audio
• 2 independent stereo audio transmissions per 1/2 RV enclosure
• USB port for firmware updates
• Fully Dante™ compatible
• IR (infrared) port for fast setup
• Up to 50 mW per Rf carrier
• All metal housing
• Compatible with Wireless Designer™ Software

The M2R bodypack receiver employs advanced antenna diversity switching during digital packet headers for seamless audio. The 24 bit digital audio stream guarantees high resolution sound quality with wide dynamic range, low noise floor, and rock-solid stereo image. The receiver can select from stereo, mono from left channel only, or mono from right channel only, giving the unit flexibility in terms of the application. The headphone jack is fed from a high-quality stereo amplifier with 250 mW available to drive headphones or earphones to sufficient levels for stage performance or other environments with significant background noise. A high-resolution, color LCD allows for a wide range of menu options, including precise limiter settings, using detailed graphics. The M2R runs on two AA batteries for an operating time of over 4 hours with alkaline cells.

Main Features:
• IEM (Wireless Monitor) receiver with digital RF
• 24-bit digital audio
• IR (infrared) port for fast setup
• High resolution, color LCD
• Stereo or mono operation
• Low latency of 1.4 ms with analog inputs

• Operating Spectrum: 470.100 - 614.375 MHz
• Modulation Type: 8PSK with Forward Error Correction, spread spectrum
• Occupied Bandwidth: 200 KHz
 • Digital Source: 1.0 ms
 • Analog Source: <1.4 ms
Audio Performance:
 • Frequency Response: 20Hz - 15 KHz, - 3dB
 • THD+N: 0.15% (1kHz @ -10 dBFS)
 • Dynamic Range: >95 dB weighted
 • Adjacent Channel Isolation >85dB
• Diversity Type: Switched antenna phase, during packet headers
• Audio Output: Earphone: 250 mW at 32 Ohms
• Power requirements: 2 x AA batteries (3.0V)
• Battery life: 7 hours; (2) Lithium AA
• Power consumption: 1 W
 • Height: 3.0 in. / 120 mm. (with knob)
 • Width: 2.375 in. / 60.325 mm.
 • Depth: .625 in. / 15.875 mm.
 • Weight: 9.14 ounces / 259 grams (with batteries)
Black waterproof injection molded case with interior dimensions of 13.8" x 9.3" x 6.2". DICED FOAM

Main Features:
• Carry case for Audio Visual Recording Equipment - Electronic Equipment - and Optical Lenses
• Water and dust proof with IP 67 certification
• ATA-300 Certification
• Impact proof lightweight NK-7™ resin
• Easy Release Powerclaw™ Latching System
• Soft grip comfort handle
• Pad-Lockable
• Mil-STD-810F Immersion Test Certified
• Empty Case Interior (13.8" x 9.3" x 6.2")

List Price: $4,976.99
Free Shipping!
Call for availability
You Saved:
$1,482.99 (30%)

View ALL Lectrosonics Products

Customers also Viewed...
Recently Viewed