Bing ads convertion tracker RDL DD-BN22
Bookmark and Share

RDL DD-BN22


Bi-Directional Mic/Line Dante Interface 2 x 2 w/PoE -White

BSW PART: DD-BN22

DD_BN22.JPG
The DD-BN22 is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs and two XLR mic or line outputs on the front panels. Special software is not required to configure the DD-BN22. Each XLR input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom; the second switch selects the mic or line gain range; the third switch sets the gain. Each XLR output provides a switch to set the output to balanced professional line level or mic level. The DD-BN22 fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DD-BN22 is PoE powered, and is available in multiple finishes with optional customized graphics.

Specifications:
• Network Connector: RJ45 with Link and Speed indicators
• Digital Audio Ethernet Protocol: Dante
• Transmission Rate: 100 Mbps
• Sample Rates Supported: 44.1 kHz, 48 kHz (default)
• Bit Depth Supported: 24 bits
• Audio Operating Level: -20 dBFS = +4 dBu
• Reference Level: 0 dBFS = +24 dBu
Mic/Line Inputs to Network Interface:
• Inputs (2): XLR (female)
• Gain: Mic: 40 dB (LO), 48 dB (MED), 62 dB (HI); Line: Unity (LO), 8 dB (MED), 19 dB (HI)
• Input Level (for +4 dBu/-20 dBFS): Mic: -36 dBu (LO), -44 dBu (MED), -58 dBu (HI); Line: +4 dBu (LO), -8 dBu (MED), -15 dBu (HI)
• Input Level (maximum): Mic: -16 dBu (LO), -24 dBu (MED), -38 dBu (HI); Line: +24 dBu (LO), +12 dBu (MED), +5 dBu (HI)
• Input Impedance: > 2.5 kΩ (MIC); > 5 kΩ (LINE)
• Phantom Power: P48, 48 Vdc, switch-selectable
• Standard for Phantom: IEC 61938: 2013
• Selectors per input (3): Phantom, Mic/Line, Gain
• Frequency Response: 20 Hz to 20 kHz (± 0.5 dB)
• Equivalent Input Noise: -130 dBu (62 dB gain); -132 dBu A-Weighted
• Noise below -20 dBFS (20 to 20 kHz): Mic: < -72 dB (LO), < -72 dB (MED), < -68 dB (HI); Line: < -72 dB (LO), < -72 dB (MED), < - 70 dB (HI)
• THD+N: < 0.1% (20 Hz to 20 kHz, +4 dBu/-20 dBFS); 0.015% at 1 kHz (typ)
• CMRR: > 65 dB (50 Hz to 120 Hz)
• Crosstalk: Below Noise Floor (20 Hz to 20 kHz at operating level, any input to any input, max. mic gain)
Network to Mic/Line Outputs:
• Outputs (2): XLR (male)
• Output Level (operating): +4 dBu nominal LINE level balanced; -45 dBu nominal MIC level (into 150 Ω)
• Output Level (maximum): +24 dBu LINE level
• Output Impedance: 150 Ω balanced
• Selector per output: Mic/Line
• Frequency Response: 20 Hz to 20 kHz (± 0.5 dB)
• THD+N: < 0.1% (20 Hz to 20 kHz,+4 dBu/-20 dBFS); 0.015% at 1 kHz (typ)
• THD: < 0.01% (1 kHz)
• Noise: < -80 dB (below +4 dBu); < -100 (below +24 dBu)
• Crosstalk: Below Noise Floor (20 Hz to 20 kHz at operating level, output to output)
• Headroom above +4 dBu/-20 dBFS: 20 dB
• Indicators (4): Ethernet Link and Speed (2, rear panel); Sync and Power (2, front panel)
• Ambient Operating Environment: 0° C to 40° C; 30° C maximum recommended
• Power Requirement: PoE Class 0, IEEE 802.3af
• Specification Conditions: Gain/Level: ± 1 dB; Source termination: 150 Ω; A to D values measured in digital domain
• Dimensions: 3.52" (8.94 cm) W; 4.11" (10.44 cm) H; 2.09" (5.31 cm) D
• Package Type: Cardboard Box
• Package Dimensions: 3.625 x 4.625 x 2.125 in.
• Shipping Weight: 1.09 lbs.
• WEEE weight: 0.935 lbs.
• Tariff code: 8517.18.0050

RDL DD-BN22 Figure 1

List Price: $812.56
$579.17
Free Shipping!
Call For Availability
You Saved:
$233.39 (29%)


View ALL RDL Products

Customers also Viewed...
Recently Viewed