The ASI1432 is an analog input module intended for use in the Hono AVB/Cobranet Custom Interfaces. It contains eight inputs and outputs that operate at 48kHz (CobraNet) and 48/96kHz (AVB) sample rates. Up to four ASI1432 modules may be used in one unit. AudioScience’s CobraNet implementation, based on the CobraNet chip used, allows for up to 16 inputs and outputs, out of a possible 32, to be used at any given time. AVB units may use all 32 possible channels.
Main Features:
• Eight inputs
• 24bit analog-to-digital converters:105dB SNR and 0.0015% THD+N
• -10 to +24dBu software controlled input level
• Interchangeable Module Connectors with choice of Terminal Block, StudioHub+TM RJ-45, 50pin Centronics connector (compatible with AudioScience sound cards) or ¼ “ TRS
• Up to four modules can be used in one Hono Custom
Specifications:
ANALOG INPUT:
• Type: Balanced
• Input Level: -10 to +24dBu in 1dBu steps
• Input Impedance: 10K ohms
• A/D converter: 24bit Over sampling
• S/N Ratio[1]: >105dB (record or play)
• THD+N[2]: <0.0015% (record or play)
• Frequency Response: 20Hz to 20kHz +0.1/-0.30dB
SAMPLE RATE CLOCK:
• Internal - Cobranet: 48kHz
• Internal - AVB: 48kHz or 96kHz
CONNECTOR MODULES:
• ASI1491: 50 pin Centronics
• ASI1492: StudioHub compatible RJ-45 jacks
• ASI1493: 5 position 3.81mm pluggable terminal block (8 per module)
• ASI1494: 8 ¼” TRS inputs
GENERAL:
• Bus: AudioScience Hono Custom series module bus
• Dimensions: (Without Module Connector) 5.5" x 3.25" x 0.6" (140mm x 83mm x 15mm)
• Weight: 8 oz (227g) max
• Operating Temperature: 0C to 70C
• Power Requirements: +5V @ 500mA