Bing ads convertion tracker Ashly NX752
Bookmark and Share

Ashly NX752


Power Amplifier 2 x 75 Watts at 2 Ohms

BSW PART: NX752

NX752.JPG
NX752.JPGNX752pic2.JPG
NX Multi-Mode Power Amplifiers are designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces and convention centers. Available in three amplifier series, NX offers 2 or 4-channel models as NX (base model series), NXE (networkable), or NXP (networkable + DSP).

Main Features:
• Selectable 80Hz 2nd-order Hi-pass filter, limiter, and input gain per channel
• Remote DC level control per channel
• Extensive protection circuitry, continuously variable cooling fan
• Euroblock input connectors
• Euroblock loudspeaker connectors
• Detachable AC mains line-cord connector
• Safety/Compliance: cTUVus (pending), CE, FCC, RoHS

Specifications:
• Voltage Gain: Selectable at 26dB, 32dB, 38dB, or 1.4V
• Damping Factor: >250 (8 Ohm load <1kHz)
• Input High Pass Filter: 80Hz 2nd order
• Distortion (SMPTE, typical): <0.5%
• Distortion (THD-N, typical): <0.5% (8 Ohms, 10dB below rated power, 20Hz–20kHz)
• Channel Separation: -75dB (dB from full output, 1kHz)
Signal-to-Noise (unweighted) 20Hz-20kHz, Gain@26dB:
 • >99dB (all 150x models)
 • >96dB (all 75x models)
• Frequency Response: 20Hz-20kHz, +/-0.05dB
• Balanced Input Connector: Euroblock 3.5mm
• Input Impedance: 10k Ohms
• Maximum Input Level: +21dBu
• Speaker Output Connector: Euroblock 7.62mm
• Remote DC Level Control: Euroblock 3.5mm – Gnd, CV, V+ per input
• Attenuators (per channel): Rear panel, Fully off = Mute
• Amplifier Protection: Shorted output power limiting, over-temperature, DC-output, power-supply fault, mains-fuses & inrush-current limiting
• Cooling: Continuously variable temperature controlled fan
• Environmental: 32°F-120°F, (0°C-49°C) non-condensing
Weights and Dimensions:
• Unit Dimensions: 19”W x 1.75”H x 14.54”D (483mm x 45mm x 369mm)
• Shipping Dimensions: 25.2"W x 2.5"H x 19.5"D (641mm x 64mm x 495mm)
• Unit Weight: 1504/754 12.1lbs (5.5kg), 1502/752 11.3lbs (5.1kg)
• Shipping Weight: 1504/754 16.0lbs (15.0kg), 1502/752 14.2lbs (6.4kg)
Front Panel LED Indicators:
• POWER (white): Switch: On, Off, Standby (flashing)
• PROTECT (red): On (fault condition or shut down), Off
• SLEEP (blue): On, amplifier is asleep from audio inactivity
• DISABLE (yellow): On, power switch & attenuators are disabled Per Channel
• CLIP/MUTE (red): Clip @ 1dB below rated output / Mute
• SIGNAL (green): -18dB below rated output
• CURRENT (green): Brightness is proportional to output current
• TEMP (yellow): On dim at 90% max operating temperature, On full bright + protect at 100%
• BRIDGE (green): Per Channel Pair, On, Off
Remote Accessories:
• WR-1: 2-Channel Level Control
Power Requirements (50 – 60Hz):
• Nominal Voltage Input: 100 – 240VAC
• Operating Range: 70 – 270VAC
• Minimum power-up: 70VAC
• Power Supply Type: SMPS with active PFC (Power Factor Correction)
• AC Mains Line Cord Connector: Detachable Nema 5-15 for USA (May vary for export)

List Price: $1,189.00
$949.00
Free Shipping!
Call For Availability
You Saved:
$240.00 (20%)


View ALL Ashly Products

Customers also Viewed...
Recently Viewed