Bing ads convertion tracker QSC PLX1802
Bookmark and Share

QSC PLX1802


330 Watt @ 8 OHM Power Amp

BSW PART: PLX1802

PLX1802
Designed to drive up to four loudspeakers from each amplifier channel (2 ohm loading), or when extremely high power bridge mono operation is required, the PLX1802 delivers up to 1800 W of power and features built-in subwoofer processing, filter switches, and front panel indications of bridge mono status. Boasting third generation QSC PowerLight technology delivering 100,000 energy pulses per second (compared to 60 pulses per second from conventional AC transformers), its power supply doesn't "sag" so bass notes stay full and powerful while the high end remains crisp and clean. To reduce crossover distortion, its precision bias tracking makes minute adjustments as the amplifier temperature changes. This makes for cleaner high frequency and more consistent sound no matter how hard the amplifier is driven.

Weighing only 21 lbs (9.5 kg), the compact yet rugged PLX1802 will give you professional grade performance without breaking your back—or your budget.

Main Features:
• 2-ohm minimum impedance
• Speakon loudspeaker connections
• QSC PowerLight high-performance, compact, and lightweight switching power supply
• Complete amplifier protection
• XLR and 1/4-inch TRS balanced input connectors
• Gain controls are recessed and 21-step detented
• Active inrush current limiting eliminates need for power sequencing
• LED indicators for power, input signal presence, -10 dB, and clip/protect
• Rear chassis tabs and front panel design protect controls and connectors
• Bridgeable output
• Binding post loudspeaker connections
• Clip limiter
• 33 Hz low frequency filter
• Low-cut/full-range/high-cut selector
• Stereo/bridge mode/parallel input selector
• Front panel LED indicators for parallel and bridge modes

STEREO MODE, BOTH CHANNELS DRIVEN:
• 8 ohms
• FTC 20 Hz - 20 kHz 0.05% THD 320 W
• EIA 1 kHz 0.1% THD 330 W
• 4 ohms
• FTC 20 Hz - 20 kHz 0.05% THD 525 W
• EIA 1 kHz 0.1% THD 575 W
• 2 ohms
• EIA 1 kHz 1% THD 900W

BRIDGE MONO MODE:
• 8 ohms
• 20 Hz-20 kHz 0.1% THD 1100 W
• EIA 1 kHz 0.1% THD 1200 W
• 4 ohms
• 1 kHz 1% THD 1800 W
• Signal to Noise (20 Hz - 20 kHz) -107 dB
• Input Sensitivity @ 8 ohms 1.28 Vrms
• Gain @ 8 ohms 32 dB
• Output Circuitry AB
• Distortion (SMPTE-IM) Less than 0.02%
• Typical Distortion
• 1/8 rated power, 20 Hz-20 kHz Less than 0.02%
• Full rated power, 20 Hz-20 kHz Less than 0.02%
• Frequency Response 20 Hz-20 kHz, -0.5 dB

List Price
$1,299.99
Usually Available in 1-2 Weeks
Contact us for your Discounted Price


View ALL QSC Products

Customers also Viewed...
Recently Viewed