Bing ads convertion tracker QSC PLX3102
Bookmark and Share

QSC PLX3102


600 Watt @ 8 OHM Power Amp

BSW PART: PLX3102

PLX3102
Designed to drive up to four loudspeakers from each amplifier channel (2 ohm loading), or when extremely high power bridge mono operation is required, the PLX3102 delivers up to 3100 W of power and features built-in subwoofer processing, filter switches, and front panel indications of bridge mono status. Boasting third generation QSC PowerLight technology delivering 100,000 energy pulses per second (compared to 60 pulses per second from conventional AC transformers), its power supply doesn't "sag" so bass notes stay full and powerful while the high end remains crisp and clean. To reduce crossover distortion, its precision bias tracking makes minute adjustments as the amplifier temperature changes. This makes for cleaner high frequency and more consistent sound no matter how hard the amplifier is driven.

Weighing only 21 lbs (9.5 kg), the compact yet rugged PLX3102 will give you professional grade performance without breaking your back—or your budget.

Main Features:
• 2-ohm minimum impedance
• Speakon loudspeaker connections
• QSC PowerLight high-performance, compact, and lightweight switching power supply
• Complete amplifier protection
• XLR and 1/4-inch TRS balanced input connectors
• Gain controls are recessed and 21-step detented
• Active inrush current limiting eliminates need for power sequencing
• LED indicators for power, input signal presence, -10 dB, and clip/protect
• Rear chassis tabs and front panel design protect controls and connectors
• Bridgeable output
• Binding post loudspeaker connections
• Clip limiter
• 33 Hz low frequency filter
• Low-cut/full-range/high-cut selector
• Stereo/bridge mode/parallel input selector
• Front panel LED indicators for parallel and bridge modes

STEREO MODE, BOTH CHANNELS DRIVEN:
• 8 ohms
• FTC 20 Hz - 20 kHz 0.05% THD 550 W
• EIA 1 kHz 0.1% THD 600 W
• 4 ohms
• FTC 20 Hz - 20 kHz 0.05% THD 900 W
• EIA 1 kHz 0.1% THD 1000 W
• 2 ohms
• EIA 1 kHz 1% THD 1550 W

BRIDGE MONO MODE:
• 8 ohms
• 20 Hz-20 kHz 0.1% THD 1900 W
• EIA 1 kHz 0.1% THD 2100 W
• 4 ohms
• 1 kHz 1% THD 3100 W
• Signal to Noise (20 Hz - 20 kHz) -107 dB
• Input Sensitivity @ 8 ohms 1.23 Vrms
• Gain @ 8 ohms 35 dB
• Output Circuitry 2-Step Class H
• Distortion (SMPTE-IM) Less than 0.02%
• Typical Distortion
• 1/8 rated power, 20 Hz-20 kHz Less than 0.02%
• Full rated power, 20 Hz-20 kHz Less than 0.02%
• Frequency Response 20 Hz-20 kHz, -0.5 dB

List Price: $1,419.99
$1,159.99
Free Shipping!
Usually Available in 1-2 Weeks
You Saved:
$260.00 (18%)


View ALL QSC Products

Customers also Viewed...
Recently Viewed