Bing ads convertion tracker Yamaha EMX2
Bookmark and Share

Yamaha EMX2


10ch Powered Mixer, 2x 250W

BSW PART: EMX2

EMX2.JPG
EMX2.JPGEMX2pic2.JPG
Because the EMX2 is both a mixer and a power amplifier, you only need speakers and mics to have a fully functioning sound system. This makes it easy for newcomers, and even first-time users with no previous audio experience to easily configure their own sound reinforcement system. The EMX2's all-in-one design concept ensures that by just plugging in a single power cable and making a few simple, intuitive connections, anyone can be their own sound engineer.

Main Features:
• 500-watt power amplifier for versatility in a wide variety of performance applications
• 10-channel mixer with four mono mic/line and three stereo line input channels, supporting a wide range of inputs
• Yamaha’s high-quality SPX reverb, providing optimum processing for instruments or vocals
• Feedback Suppressor, which automatically cuts and prevents undesirable feedback noise
• Independent three-band equalizer on each channel for tonal adjustment and sound control

Specifications:
I/O:
 • Inputs: TOTAL 10ch : Mono (MIC/LINE):4, Stereo(LINE):3
 • Phantom power: CH1, 2 : +30 V
 • Outputs: SPEAKERS [L, R], MONITOR OUT [L,R], SUBWOOFER OUT
 • Control and others: FOOT SW : Effect Mute on/off
• Bus: Stereo: 1, Effect: 1
Input Channel Function:
 • PAD: 26 dB (CH1-4)
 • Hi-Z: Supported (CH4)
 • EQ HIGH: 8kHz +15dB / -15dB
 • EQ MID: 2.5kHz +15dB / -15dB
 • EQ LOW: 100Hz +15dB / -15dB
On-board processors:
 • DSP: SPX Algorithm Reverb 4 programs, MASTER EQ (SPEECH to MUSIC), Feedback suppressor
On-board amplifiers:
 • Maximum output power @4ohms: 1kHz THD+N less than 10% (CEA2006) : 250 W + 250 W, 1kHz THD+N less than 1% : 110 W + 110 W
 • Maximum output power @8ohms: 1kHz THD+N less than 10% (CEA2006) : 170 W + 170 W, 1kHz THD+N less than 1% : 110 W + 110 W
• Level Meter: 6points (-20, -6, 0 , +3, +6, LIMITER)
• Frequency response: Input to SPEAKERS : +1 dB/-4 dB (40Hz to 20kHz), Input to MONITOR OUT : +0.5 dB/-1.5 dB (20Hz to 20kHz) , refer to the nominal output level @ 1 kHz
• Total harmonic distortion: Input to SPEAKERS : 0.2 % @ 13.8 W (40Hz to 20kHz), 0.4 % @ 23.2W (1kHz), Input to MONITOR OUT : 0.05 % @ +10 dBu (20Hz to 20kHz) 0.009 % @ +20 dBu (1kHz), (THD+N, Measured with 22 kHz LPF)
Hum & noise level:
 • Equivalent input noise: -115 dBu
 • Residual output noise: Input to SPEAKERS : -68 dBu (40Hz to 20kHz, MASTER: min), Input to MONITOR OUT : -99 dBu (20Hz to 20kHz, MONITOR: min)
• Crosstalk: -80 dB (1 kHz, Measured with 1 kHz band pass filter)
Protection circuit:
 • Load protection: DC-fault
 • Amplifier protection: Over heat protection, Over current protection
• Power requirements: AC 100-240V, 50Hz/60Hz
• Power consumption: 35W (Idle) / 90W (1/8 Power)
Dimensions:
 • W: 375 mm (14.8")
 • H: 147 mm (5.8")
 • D: 220 mm (8.7")
• Net weight: 4.2 kg (9.3 lbs.)
• Accessories: Owner’s Manual, Technical Specifications, Power Cord (2m)
• Others : Operating Temperature : 0 to +40?

List Price: $620.00
$449.99
Free Shipping!
Call For Availability
You Saved:
$170.01 (27%)


View ALL Yamaha Products

Customers also Viewed...
Recently Viewed