The Moseley Rincon is the broadcast industry's first Software Defined Audio Transport Product optimized to deliver multichannel digital audio over IP, TDM or Radio links and networks simultaneously.
Rincon 404's standard features include analog stereo ports (0 in, 4 out), 4 direction-programmable AES ports, 3 RS232 ports, an E1/T1 port and an Ethernet port. It adds advanced features such as 3 solid-state relays, 3 digital inputs, 3 additional RS232 ports, a secondary E1/T1 port and a secondary Ethernet port.
Moseley Rincon 404 Features:
• 4 stereo channels per unit provides high payload capacity, supports multi-station clusters
• Bidirectional Ethernet transport in T1 mode supports HD Radio™ stream and IP based equipment control
• Very low delay for critical real-time broadcasts
• AES/EBU and Analog XLR connectors and integrated Analog and AES / Audio Switcher for operator's ease of use
• Choice of Linear Uncompressed, MPEG2, MP3, AAC LC&LD, and G.722/G.711 maximizes performance over any network topology
• Simultaneous E1/T1, IP and Radio transport allows broadcasters to select the most cost effective network available
• Integrated Ethernet Switch for QOS to make sure your audio gets through the traffic
• Integrated Web Server/SNMP Agent for ease of management
• Manage Rincon from your Smartphone or Tablet
• Auto negotiation of parameters between units makes it easily deployed and field configurable
• Unicast/Multicast RS-232 channels for RDS or device control
• 8 Alarm and 3 Status conditions are transported across the link
• 100 parameters can be mapped to alarms or status reporting
Moseley Rincon 404 Specifications:
System Transport:
• Interoperability: ACIP Compliant and VLC Compatible
• FEC: Pro-MPEG CoP 3 r2
• Streams: Up to 8 Audio Streams
• VLAN: IEEE 802.1Q Support
• Packet Size: User selectable per stream
• Jitter Buffer: Adaptive or adjustable per stream
• QoS: Per stream, ToS, DiffServ
• Topology: Point-to-Point unidirectional; Point-to-Point bidirectional; Point-to-Multipoint multicast
• Synchronous Backup: Programmable failover per stream to Alternate audio source and transport
• Latency: IP TRANSPORT 30 - 500 ms
System Audio:
• Frequency Response: < 5 Hz to 22.5 KHz (48 kbps); < 5 Hz to 15 kHz (32 kbps)
• Distortion: < 0.01% at 1 kHz
• Sample Rate: Selectable 32, 44.1, 48 kHz; built-in rate converter
• Dynamic Range: 90 dB static encoder/decoder: > 120 dB AES EBU
• Cross Talk: -80 dB
• Level Stability: < 0.2 dB
• Channels Supported: 4 stereo channels digital audio; 4 stereo channels analog audio
• Source Encoder and Decoder Choices: Uncompressed, MPEG Layer 2/3; AAC - LD, LC, G722, G711
Encoder and Decoder:
• Audio Connectors: Analog input XLR Male, output XLR Female, AES/EBU, RJ-45 (Ext XLR Cable)
• Audio Sample Rates: 32/44.1/48 kHz selectable, built-in rate converters
• Analog Audio Inputs: Electronically balanced, 600 ohm/10 kohm, selectable, CMRR>60 dB
• Analog Audio Outputs: Electronically balanced, low-Z
• Analog Audio Level: -10 dBu to +18 dBu
• Digital Audio: AES/EBU
• AES/EBU I/O: Transformer balanced, 110 ohm
• Data Input Rates: Async, 300-9600 bps selectable
• Bits: 16 or 24 bits
T1/E1 Interfaces:
• E1/T1 Interface: 2 X E1 / T1
• CSU: Built-in
• Connector: RJ-45, available BNC adaptor
• Impedance: 100 ohm balanced
• T1 Line Codes: B8ZS, AMI
• T1 Framing: ESF, D4
• E1 Line Codes: HDB3
• E1 Framing: 256N, 256S, with/without CRC-4
• E1 Compliance: CCITT Rec. G.703, G.704, G.732
• Line length EQ: Short-haul and long-haul supported
Ethernet Ports:
• Ethernet Interface: 2 X 100Base-T Interface
• Standard: Ethernet IEEE 802.3 bridge
• Connector: RJ-45 (2 ports)
Physical:
• Power: Universal AC 90-260V, 47-63 Hz optional redundant power
• Supply Optional 24Vdc, 48Vdc supply
• Dimensions: 1.75"x 17.5" x 8.5" (1RU), 44.5mm x 445mm x 216mm
• Mount: Rack mount with included ears
• Temperature: 0°C to 50°C Operational
• Humidity: 90% Non-condensing
• Regulatory: FCC Part 68, FCC Part 15, ETSI