Flagship of the line, Alpha 80 is particularly ideal for producing music which is rich in bass or which requires high power reserves. This model is composed of a 8” (21cm) woofer/ midrange speaker with a Polyglass cone loaded in a large laminar port and of a 1" (25mm) aluminum inverted dome tweeter. It features a 40W amplifier for the tweeter and a 100W amplifier for the woofer, and has a frequency response of 35Hz to 22kHz (+/- 3dB).
Main Features:
• Low directivity: keeps the same sound throughout the room
• Damping and rigidity: neutrality, no distortion
• Tonal balance is identical at low and high volumes, low sensitivity to the wall effects
• Connect up to 2 audio sources
• Optimal acoustic integration
• Reduced power consumption
Specifications:
• Frequency response (+/- 3dB): 35Hz - 22kHz
• Power: 140W (100W+40W)
• Maximum SPL: 109dB SPL (pic @ 1m)
Inputs Connectors:
• XLR balanced 10kOhms
• RCA unbalanced 10kOhms with sensitivity compensation
• LF amplifier stage: 100W, class AB
• HF amplifier stage: 40W, class AB
• Standby Mode: After about 30 minutes without using the monitor
• Activation of the monitor: By signal detection >3 mV
• Power supply (The voltage can not be modified): 220-240V (fuse T1.6AL/250V) or 100-120V (fuse T3.15AL/250V)
• Connection: IEC inlet and detachable power cord
• Sensitivity: Adjustable, 0 or +6dB
• LF shelving (0 - 300Hz): Adjustable, +/-6dB
• HF shelving (4.5 - 22kHz): Adjustable, +/-3dB
• Power ON/OFF: Switch on rear panel
• Standby mode power consumption: < 0,5W
• Indicators: Power ON/OFF LED - Standby LED
• Woofer: 8" (21cm) drive unit - Polyglass cone
• Tweeter: 1" (25mm) drive unit. Aluminium inverted dome
• Construction: 0.6" (15mm) MDF
• Finish: Vinyl and Black painting
• Dimensions with 4 rubber pads (HxWxD): 15.6x11.3x13.7" (397 x 287 x 348mm)
• Weight: 28.2lb (12.8kg)