null

FREE SHIPPING on online orders over $99

Omnia MPXNODE-DECODER

Omnia

BSW PART:
MPXNODE-DECODER

FM Multiplex over IP, Decoder 2001-00522-000

$1,796.00 $1,995.00
You save $199.00

The Telos Alliance® revolutionized the modern broadcast facility with the invention of Audio over IP. We proudly extend the AoIP revolution we began in the studio out to the transmitter with the Omnia MPX Node. Like its namesake—the classic Axia® xNode™—Omnia MPX Node is a building-block technology that helps stations leverage the growing power and capability of data networking. The Omnia MPX Node is the first purpose-built hardware codec capable of sending or receiving full FM signals at data rates as low as 320 kbps utilizing the Omnia µMPX™ algorithm, ideal for networks with limited capacity (including IP radios). MPX Node makes peak-controlled L/R baseband, stereo pilot, and RDS data routable from a studio to one or many FM transmitters. By transporting an FM composite signal rather than left/right audio, broadcasters can keep their on-air processing and RDS encoding at the studio, then deliver a transmission-ready, peak controlled FM multiplex signal directly to an FM transmitter without the need for transmitter-side peak limiting or stereo generation. The MPX Node is available as either an encoder or decoder, and a pair of units creates an end-to-end system.

$1,796.00 $1,995.00
You save $199.00

Free Shipping

Out of stock

Add to quote
Qualifies for free shipping
  • Main Features:
  • MPX Node is available as either an Encoder or Decoder
  • Omnia µMPX algorithm can transport FM composite (MPX) and RDS/RBDS at 320 kbps—perfect for IP radios and DSL IP circuits and other lower bandwidth connections
  • Encoder can be fed by any brand of FM audio processor
  • Omnia.9 or OmniaSST™ processing software can serve as the Encoder front end
  • MPX Node Decoder outputs a standard analog MPX signal to feed any FM transmitter
  • Full FM signals (including RDS/RBDS) can be sent over IP networks
  • 5 In x 5 Out GPIO
  • A single Encoder can transmit the same signal to multiple decoders
  • Simple HTML.5-based web GUI allows you to control MPX Node from your desktop, tablet, or smartphone
  • Cool-running, fanless operation
  • Separate Ethernet ports for MoIP transport and web admin
  • Dual bank firmware update design, for secure upgrading
  • Half RU, xNode form factor
  • Integrated test signal generator
  • FM tilt correction
  • Specifications:
  • Analog composite FM in/out on (BNC connector)
  • Composite connector impedance 5 or 75 ohm (switch selectable)
  • 10/100 Ethernet for web control and administration
  • 10/100/1000 Ethernet for MoIP connections
  • 5 in x 5 out GPIO on a DB15 connector
  • 100-240 VAC input 50-60 Hz external power supply with 12VDC, 3.4A output on locking connector
  • 8.5” (22 cm) wide; two may be mounted side-by-side in a standard 1RU rack space with accessory mounting kit; 1.72” (4.4 cm) height, 11.75” (30 cm) depth
  • Operating temp range 0 to +40 degrees C, <90% humidity
  • Shipping weight 7 lbs. (3.2 kg.)