Bing ads convertion tracker Crown Broadcast FM300R
Bookmark and Share

Crown Broadcast FM300R


300-Watt FM Translator - Includes Built-In Receiver

BSW PART: FM300R

FM300R
The FM300R is an economical stand-alone 300W FM translator with a built-in receiver that delivers a high level of performance for today's broadcast needs.

Featuring low loss circuit boards and copper heat spreaders in the RF chain, it functions with less heat and improved life span. A robust power supply with switching voltage and power regulators for AC or DC operation let you use it anywhere power can be generated.

Main Features:
• Translator with built-in receiver
• Frequency Agile from front panel
• SWR metering from remote control
• Ability to control output power from remote control
• 3-Year warranty
• 24-hour service support
• Meets or exceeds all FCC requirements
 

FM300 TECHNICAL SPECIFICATIONS
Frequency Range 87 to 108MHz (Japanese frequency available 74-90MHz as an option) Front panel agile
RF Power 30 to 300 watts with front panel adjustment
RF Output Impedance 50 Ohms unbalanced
VSWR 1.7:1 Maximum with automatic foldback at higher VSWR
Frequency Stability Better than +/- .1KHz over operating temperature range
Modulation Type Direct Frequency Modulation of Carrier
Modulation Indication LED Indicators with Peak indicators
FM S/N Ratio (FM noise) Better than 60 dB (70 to 80 dB typical)
Asynchronous AM S/N Ratio Better than 50 dB referenced to 100% modulation @ 100 Hz, no de-emphasis.
Synchronous AM S/N Ratio Better than 50 dB with 100% modulation @ 100 Hz, no de-emphasis (typical >60dB)
RF Harmonics/Spurious Products Better than –70 dB (80 dB typical)
RF Bandwidth +/- 120 KHz, better than –35 dB; +/- 240 KHz better than –45 dB
Temperature 0 to 50 degrees C
Humidity 0 to 80% @ 20 degrees C (non-condensing)
Maximum Altitude 10,000 ft (3,000 m)
AC power 100 to 120 or 220 to 240 volts AC +/- 10%, 50 to 60 Hz
Power factor Greater than 97% (lagging)
DC Power 36 to 72 VDC (72V required for full output)
Power Consumption 700VA
Regulatory Notification for FCC part 73 and 74 Meets FCC requirements
RF Output connector Standard type N, 50 Ohm
Chassis dimensions 5.25 x 16.5 x 17.5 inches (13.4 x 41.9 x 44.5 cm) exclusive of rack mounts but inclusive of connectors
Weight 33 pounds (14.9 Kg) shipping weight = 41 Pounds (18.6 Kg)
Wide Band composite operation
Composite Inputs 1
Composite Input level 3.8 Vp-p for +/-75KHz deviation
Composite total harmonic distortion + noise < 0.05% from 50Hz to 15 Hz (0.03 typical)
Sub-carrier inputs 3
Sub-carrier input level 3.8 Vp-p for +/-75KHz deviation
Sub-carrier amplitude response +/-0.3 dB from 40Hz to
Monaural operation w/ built in Audio Processor
Audio Input impedance 50 Kohms bridging, balanced
Audio Input level 3.8 Vp-p for +/-75KHz deviation
Audio Frequency response Conforms to 75uS pre-emphasis curve for +/- 0.25 dB from 50Hz to 15KHz
Pre-emphasis Selectable 50, 75 uS or flat
Stereo Operation w/ built in Audio Processor and Stereo Generator
Audio Input impedance 50 Kohms bridging, balanced
Audio Input level -10 dBm to +10 dBm selectable for 75KHz deviation @400Hz
Frequency response +/- 0.3 dB from 50Hz to 10KHz, +/- 1.0dB from 10Hz to 15KHZ
Total Harmonic distortion + Noise 0.4% or less @ 15KHz (0.2 typical)
Stereo Separation Better than 40 dB from 50Hz to 15KHz
Linear Cross Talk Main to sub and sub to main, -40 dB or better from 50 Hz to 15 KHz
38 KHz Sub-carrier suppression >60dB
Pilot Stability +/-.5 Hz @ 9% modulation

List Price
$6,895.00
Usually Available in 1-2 Weeks
Contact us for your Discounted Price


View ALL Crown Broadcast Products

Customers also Viewed...
Recently Viewed