Bing ads convertion tracker Lectrosonics DSQD
Bookmark and Share

Lectrosonics DSQD


4ch Digital Wireless Receiver with Dante

BSW PART: DSQD

Lectrosonics DSQD
Lectrosonics DSQDLectrosonics DSQD


The DSQD Half Rack Receiver with analog and digital Dante® network audio outputs utilizes the Lectrosonics signature digital architecture with remarkable audio quality and ultra-low latency. The receiver includes an extended operating range rivaling the best analog and Digital Hybrid Wireless® systems with continuously tunable tracking filters covering 470.100 - 614.375 MHz.

The DSQD Receiver is a four-channel design with a host mainframe that contains the DSP, microprocessor, antenna multicoupler and control interface.

Antenna ports on the rear panel accept input from remote antennas, with a “loop-thru” output to another mainframe using the internal multicoupler. A kit is also available to mount antenna inputs (BNC connectors) on the front panel.

Main Features:
• Four-channel, half-rack design
• Continuously tunable tracking filters covering 470.100 - 614.375 MHz
• Compatible with DSW, Duet and Digital Hybrid Wireless® transmitters • Built-in wideband antenna multicoupler with loop-thru for additional receivers
• Antenna bias power enabled from the front panel (fused and over-temperature protected)
• IR bi-directional port for transmitter setup
• Analog and Dante® audio outputs with TalkBack (in applicable RX modes)
• Ethernet and USB interface
• Offline full-system frequency coordination

Why Dante?
• Plug-and-play technology – automatic discovery and simple signal routing
• Reduced Cost & Complexity – No special skills required to set up audio networking
• Sample accurate playback synchronization
• Lowest latency available from any networking technology
• Add/remove/rearrange components at will
• Deterministic latency throughout the network
• Support mixed bit depths and mixed sample rates over one network
• Scalable, flexible network topology supporting a large number of senders and receivers
• Supports 1Gbps networks • Supports a single integrated network for audio, video, control, monitoring
• Uses inexpensive, off-the-shelf computer networking equipment

Specifications:
• Operating Spectrum: 470.100 - 614.375 MHz
• Frequency Adjustment Range: 25 kHz steps
• Sampling Size and Rate: 24-bit, 48 kHz
• Digital Modulation: 8PSK with Forward Error Correction
• Data Encoding: Proprietary ADPCM
• Encryption: AES 256-CTR (per FIPS 197 and FIPS 140-2)
• Latency: Digital Source: 1.0 ms plus Dante network
• Analog Source: <1.4 ms
• Audio Performance:
• Frequency Response: 20 Hz - 20 KHz, +\-1 dB
• THD+N: 0.05% (1 KHz @ -10 dBFS)
• Dynamic Range: 108 dB A-wtd, NR=NORMAL
• Adjacent Channel Isolation: >85 dB
• Diversity Technique: Noiseless antenna switching
• Sensitivity: -98 dBm for 10-5 BER
• Antenna Inputs/Outputs: Dual BNC female, 50 ohm impedance
• Audio Outputs:
• XLR: Balanced, -35 to +8 dBu
• Headphone: 1/4 inch phone jack
• Dante: RJ45
• External DC Power: 7 to 18 VDC; 2.5A (max)
• Weight: 1.95 lbs.; 880 grams
• Dimensions: 8.375 x 1.75 x 7.375 in. 213 x 44.5 x 187 mm

List Price: $6,985.00
$4,990.00
Free Shipping!
Call For Availability
You Saved:
$1,995.00 (29%)


View ALL Lectrosonics Products

Customers also Viewed...
Recently Viewed