Bing ads convertion tracker Lectrosonics HHa-B1
Bookmark and Share

Lectrosonics HHa-B1


Handheld Transmitter - 537.600 - 614.375

BSW PART: HHA-B1

Lectrosonics HHa-B1
Lectrosonics HHa-B1Lectrosonics HHa-B1LECTRO_HHA.JPG

The HHa Digital Hybrid Wireless handheld transmitter represents an elegant solution for a variety of wireless microphone applications including live performance, broadcast, AV rental and houses of worship. The HHa incorporates many advanced features to provide highquality speech and vocal reinforcement. Along with providing peerless audio quality with wide frequency response and dynamic range in native 400 Series mode, the technology used in the HHa includes compatibility modes for Lectrosonics 200 Series, 100 Series and IFB receivers, and some systems from other top manufacturers.

Lectrosonics offers the HHC cardioid condenser capsule. Thread-on capsules from other manufacturers using a 1.25” opening and 28 thread pitch can also be used, including those from manufacturers such as EV, Shure , Heil Sound, Telefunken and others.

The HHa transmitter allows the user to select from among two power settings† depending on the needs of the situation. The lower RF power setting uses slightly less current, thus battery life is enhanced. The higher power setting provides greater range and resistance to dropouts. Selecting the RF power is accomplished using the control menu.

The HHa is equipped with an IR port for use with receivers. Settings, such as frequency stored in the receiver will be sent to the transmitter via the IR port.

The button on the back of transmitter below the head can be used to actuate an audio mute condition. This button can also be disabled using the control panel inside the battery compartment. An alternative function that can be actuated by this button is a talkback function. In this state, the transmitter sends a signal to the Venue receiver when the button is pushed - the receiver then switches the audio to a second output which can be routed differently.

Main Features:
• 25 or 100 kHz tuning steps for up to 3072 selectable frequencies across a 76 MHz tuning range
• Digital Hybrid Wireless® Technology
• Standard thread-on capsules
• Membrane switch and LCD interface
• AA battery power
• Selectable RF power at 50 and 100 mW
• Talkback feature
• IR (Infrared) Port for fast setup

Specifications:
• Operating Frequencies: Block A1: 470.100 - 537.575 Block B1: 537.600 - 614.375 Block C1: 614.400 - 691.175
• Frequency selection steps: Selectable; 100 kHz or 25 kHz
• RF Power output: Selectable at 50 or 100 mW
• Pilot tone: 25 to 32 kHz frequency (400 Series only); 5 kHz deviation
• Frequency stability: ± 0.002%
• Deviation: ± 75 kHz (max)
• Spurious radiation: 90 dB below carrier
• Operating temperature range: -20° C to +50° C
• Input compressor: Dual envelope compressor, >30 dB range
• Gain control range: 45 dB; semi-log menu-driven control; 1 dB steps
• Modulation indicators: Dual bicolor LEDs indicate modulation of -20, -10, 0 and +10 dB referenced to full modulation, LCD bar-graph indicator
• Frequency response 40 Hz to 20 kHz (+/- 1dB) Low frequency roll-off: -3 dB @35, 50 and 70 Hz; selectable; 36 dB/octave
• External Controls: Programmable mute/talkback button
• Battery compartment: Power, mute disable, menu/select, back and up/down arrow buttons for menu selection and settings.
• Battery: 2x AA with polarity protection and battery ejector
• Battery life: At 100mW: 5.5 hours (Duracell Quantum alkaline) (The HH transmits battery status to Lectrosonics Digital Hybrid Wireless® receivers.)
• Capsule Interface: 1.25” opening and 28 thread pitch
• Power available: 5V, 25 mA max
• Input impedance: 1000 Ohms
• Weight: 12.1 oz. with batteries and HHC capsule
• Dimensions: 9.5” long x 1.97” diameter at largest point

List Price: $1,853.00
$1,320.00
Free Shipping!
Call For Availability
You Saved:
$533.00 (29%)


View ALL Lectrosonics Products

Customers also Viewed...
Recently Viewed