Bing ads convertion tracker Sennheiser EM-6000
Bookmark and Share

Sennheiser EM-6000


2-channel digital receiver, AES-3, active antenna splitter, AES 256

BSW PART: EM-6000

EM_6000.JPG
No compromises, on any stage: With its large 244 MHz switching bandwidth, the EM 6000 2-channel digital receiver can find reliable transmission paths in absolutely any environment. Its renowned LR mode (shared with the masterpiece Digital 9000) ensures superior quality audio signals, even in the most demanding high frequency scenarios. Error correction and audio error masking recognize and fix problems long before they even become audible. This guarantees a reliable connection where other systems fail.

Through its equidistant frequency grid, Digital 6000 assures the simplest frequency configuration and excellent spectral efficiency. Thanks to the high intermodulation resistance, more channels can now be set up than ever before. Up to eight receivers can be cascaded directly from only one pair of antennas.

Maximum overview, quick setup, shortcuts to important functions: The concept for the new user interface on contrast-rich, white OLED displays comes from practical experience. All vital parameters are summarized at a glance. Important functions can be reached directly via home screens, without lengthy navigation paths. The auto-setup enables scanning and frequency distribution to all connected devices directly via the receiver. Of course, the Digital 6000 can also be monitored and configured via Wireless Systems Manager (WSM) software.

Digital 6000 seamlessly integrates with existing digital or analog infrastructures. The EM 6000 receiver has a digital AES output with word clock in and outputs, high-quality, transformer balanced analog XLR and 6.3 mm TRS jack outputs as well as a 6.3 mm headphone output. The Dante Version with an Audinate Brooklyn II card offers an additional Amphenol RJ-45 connector for integrating the receiver into a Dante network. The EM 6000 is compatible with all Sennheiser UHF antennas.

What's Included:
• 1 EM 6000
• 1 mains cable (with EU, UK or US plug)
• Quick guide
• Safety guide
• 2 Antennas
• 2 BNC Antenna Cables (50 Ω) for Daisy-Chaining
• 2 Rubber Feet

Main Features:
• 19’’ 2-Channel receiver, 19 inch 1RU
• Large 244 MHz switching bandwidth
• Legendary Long Range mode (LR) with proprietary audio codec (SeDAC) from the masterpiece Digital 9000
• True bit diversity utilizes both receiver paths, combines their information content to provide the best possible signal
• Equidistant frequency grid for maximum channel density and simplest setup
• 32 superior quality RF pre-selection filters for optimal suppression of interference signals at antenna input
• Error correction and audio error masking
• AES-256 encryption
• Automatic frequency setup
• Digital and transformer balanced analog outputs XLR, 6.3 mm jack, AES-3, EM 6000 Dante with Brooklyn II Card and Amphenol RJ-45
• Integrated antenna splitter for cascading of up to 8 systems
• one high-quality OLED display per channel
• Link Quality Indicator (LQI)
• Wireless Systems Manager (WSM) compatible
• Compatible with standard Sennheiser UHF antennas
• Compatible with Digital 9000 transmitters in Long Range mode

Specifications:
• Frequency range: 470 to 714 MHz
Transmission scheme:
• Digital modulation
• Long Range Mode
• Min. frequency spacing for equidistant grid: 600 kHz
• Audio codec: SeDAC (Sennheiser Digital Audio Codec)
• Dynamic range: 111 dB (A)
• Encryption: AES 256
Latency:
• Analog audio out: 3 ms
• Digital audio out: 3 ms (AES/EBU)
• Total harmonic distortion (THD): < 0.03 % (at 1 kHz)
Temperature:
• Operation: −10 °C to +50 °C
• Storage: −25 °C to +70 °C
Relative air humidity:
• Operation: max. 85 % at 40 °C (non-condensing)
• Storage: max. 90 % at 40 °C (non-condensing)
• Dripping and splashing liquids: The product must not be exposed to dripping and splashing (IP2X)
• Receiving channels: 2
• Receiver principle: Double superheterodyne
• Diversity: True Bit Diversity
• Sensitivity: −100 dBm typical
• Image rejection: > 100 dB typical
• Blocking: > 80 dB typical
• Audio frequency response: 30 Hz to 20 kHz (1.5 dB)
• Analog audio outputs: XLR-3 and 6.3 mm jack per channel (transformer balance), −10 dBu to +18 dBu in steps of 1 dB (2 kΩ)
Digital audio outputs:
• AES3-2003, XLR-3: 48 kHz, 96 kHz, 24 bit
• Dante™, RJ-45: 48 kHz, 96 kHz, 24 bit
• Can be externally synchronized using WCLK loop-through with BNC sockets
• Headphone output: 6.3 mm jack, 2 × 100 mW at 32 Ω
• Antenna inputs: 2 × BNC (50 Ω)
• Daisy chain outputs: 2 × BNC (50 Ω) 0 dB +/− 0.5 dB amplification relative to antenna inputs
• Daisy-chained receivers (RF): Max. 8 EM 6000 units
• Booster supply voltage: 12 V DC, max. 200 mA each via antenna sockets, short circuit proof
• Word clock input: BNC, 75 Ω
• Word clock output: BNC, 75 Ω
• Word clock sampling rates: 48 kHz, 96 kHz
• Network: IEEE 802.3-2002 (10/100 Mbit/s), shielded RJ-45 connection
• Power supply: 100 to 240 V AC, 50/60 Hz
• Power consumption: Max. 35 W
• Power plug: 3-pin, protection class I as per IEC/EN 60320-1
• Dimensions (H × W × D with mounting elements): 44 × 483 × 373 mm
• Weight: Approx. 5.2 kg

List Price: $4,375.00
$3,500.00
Free Shipping!
Call For Availability
You Saved:
$875.00 (20%)


View ALL Sennheiser Products

Customers also Viewed...
Recently Viewed